ARDUINO® TINKERKIT PUSHBUTTON - NEW!

ARD-T000180

The Pushbutton Module is possibly the simplest sensor available. It detects when a person or an object presses its circular cap.

 

Output: This module outputs 5 V when the button is pressed and 0 V when released. Pressing the button closes the circuit. When connected to an input on the Arduino using the TinkerKit Shield, you can expect a value of 1023 while the button is pressed and 0 when released.

 

Module description: This module features a 12 mm push button, the standard TinkerKit 3-pin connector, a green LED that signals that the module is correctly powered, and a yellow LED that is lit only when the button is pressed.

 

This module is a SENSOR. The connector is an OUTPUT which must be connected to one of the INPUT connectors on the TinkerKit Shield. 

 

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

: del.icio.us | Digg