Home | Products | AIROTRONICS RELAYS | Flashers

Flashers

Font size:

CUBE SOLID STATE, FLASHER, 1 AMP THKA Timers / Flashers THKA timers are solid state output units with digital timing and similar on/off cycle times. The THKA comes in a 2" square case. Ease of installation and hook-up is a primary design benefit. All models with integral time adjustment knob or factory-fixed time require only two connections. They may be wired in-line just like a single pole switch. Units with external time adjustment have two additional terminals for the resistor or potentiometer.

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode
Application of input voltage to the timer starts the “On” time delay. At the end of the “On” time delay, the “Off” time delay starts. At the end of the “Off” time delay, the load is again energized, the timer returns to the “On” time delay, and the cycling continues as long as input voltage is applied. Removal of the input voltage resets the timer.

Cube Relay, 10-30 Amps, Timer with Relay Output

Features:

Digital timing, solid state output
1 Amp current load handling
10 Amps single-cycle surge handling
4 Overlapping AC voltage ranges (from 19to 277 volts) plus 19-48 VAC/VDC
±0.1% Repeat accuracy
Virtually unlimited time ranges
Factory-fixed or variable timing adjustment
Totally encapsulated for protection from harsh environments
O-ring sealed exposed controls
Single screw mounting through center mounting hole
Standard 6.35mm (0.25") quick connect blade terminals
100% Operational testing before shipping
RoHS compliance available

Basic Wiring and Dimensions

Specifications:

Input Voltage

VAC: 19 thru 277, 50/60Hz
VDC: 19 to 48

Repeat Accuracy

±0.1% under fixed conditions

Time Ranges

0.1 sec. to 24 hours (1 sec., 10 sec., 100 sec., and 1000 secs. are standard)
Special time ranges available upon request

Reset/Recycle Time

100 milliseconds

Tolerances

      Fixed: ±10% of nominal time
      (optional: ±5%, ±1%)
      Variable: -0%, +15%
      Limit: -10% at minimum time

Recycle Effect

None

Temperature Ranges

Storage: -40°C to +85°C
Operating: -25°C to +65°C

Life Expectancy

No predictable failure if used within operating parameters

Protection

      Polarity Protection: All DC units have reverse polarity protection
      Transient Protection: 18 joules
      Dielectric Strength: 1800V RMS 60Hz