Logo Call:
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

Distributors for

GC Electronics logo


Adhesives (see below)
Air Dry Adhesives
Anti-Static Products
Chemical Applicators
Cooling Sprays
Corrosion Inhibitors
Cyanoacrylate Adhesives
Electrical/Industrial Products
Epoxy Adhesives
Flux Removers
Glass Cleaners
Headcleaners and Accessories
Heat Sink Products (see below)
Non-Aerosol Cleaners
Paints & Varnishes
RTV (see below)
Series II HCFC Products
Series II Hydrocarbon Products
Solder Flux
Solvent Release Adhesives
Specialty Products (see below)
Specification Chart
Static Control Products
Thinners & Solvents


Quik Stix - Cat. No. 10-114 (Two 1/2 fl. oz. Tubes)
5 Minutes Set Clear, fast curing epoxy adhesive. In view of its short pott life, use is recommended when a single repair must be made and the mixed adhesives can be used within one or two minutes. Cemented items can be safely handled within eight to twelve minutes, with full hardness obtained after several hours. This cement is relatively thin in consistency and should be used to cement closely matching surfaces. The glue line is usually invisible.

GC Super Glue Regular Formula - Cat. No. 10-120 (0.075 fl. oz. [2 ml.] Tube)
Ethyl Cyanoacrylate Adhesive Medium viscosity formula for efficient wicking action, faster curing time. Excellent for bonding any combination of plastic, rubber or metal parts. This grade is ideal for small or fine work on non-porous, smooth surfaces. It fills gaps of .003-.005". Highly resistant to acid, alkali, alkali water, solvents and fungus. Non-toxic. (Meets Mil. spec. MIL-A-46050B Type 1 Class 2.)


Silicone Rubber Adhesive/Sealant - Cat. No. 10-150
One-component elastomer cures to a tough, rubbery solid when exposed to moisture in the air. Designed to fulfill industrial and electronic service sealing and bonding requirements, this sealant has excellent adhesive strength high elongation and outstanding insulation and heat resistance qualities. Develops primerless adhesion to a variety of materials, including metal, glass, most wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fibers; most plastics and painted surfaces. Resists weathering, vibration and exposure to oil, moisture, ozone, and temperatures from sub-zero to 450 degrees Fahrenheit. Cures to a tack-free surface in 20 minutes. Full cure, 24 hours. Ideal for many sealing, bonding and insulating applications, including general electrical insulation, potting exposed electronic components, bonding gaskets for heating and refrigeration units, formed-in-place gaskets for gear boxes, compressors, pumps and outdoor motor covers, pressure sealing of aircraft cabins and cockpits, caulking sheet metal stacks, ductwork and equipment housings, and as an anti-abrasion coating.

As Cured--Electrical
ASTM D 257 Volume Resistivity, ohm-cm - 1.5 X 10^15 ASTM D 149 Dielectric Strength, volts/mil - 550 ASTM D 150 Dielectric Constant, at 60 Hz 2.8 at 100 Hz - 28 at 100 kHz - 2.8 ASTM D 150 Dissipation Factor, at 60 Hz - 0.0015 at 100 Hz - 0.0015 at 100 kHz - 0.0015

GC Heat Sink Compounds:

Silicone (Z9) - Cat. No. 10-8109
Industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden. Meets Mil. Spec. C-47113.

Specialty Chemicals:

Silicone Compound - Cat. No. 10-8101
Soft, inert silicone grease with excellent dielectric properties. Usable over a wide range of temperatures. Its consistency is vaseline-like and it is white opaque in color. It provides an excellent dielectric coating which excludes moisture and prevents high voltage arcing. Applicable to components in the high voltage section of TV receivers. Protects ignition systems in automobiles and boats, in addition to providing an outstanding corrosion resistant coating on exposed metal surfaces, such as TV antenna terminals as well as general rustproofing. This compound also makes an excellent lubricant for rubber or plastic.

© 1997 GC Electronics

Bullet Audio Bullet Chemicals Bullet Components Bullet Computer
Bullet Connectors Bullet DataCom Bullet Electronic Tools Bullet Printed Circuits
Bullet Sound Distribution Bullet Switches Bullet Telephone Bullet Video
Bullet Wire Bullet HOME PAGE Bullet GC Electronics MENU

Logo Call:
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

© 2007 Industrial Electronics By Ross LLC