Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.
Distributors for
Fluke Handheld Meters and Accessories

76 True-rms Analog/Digital Multimeter

High Performance Features and True-rms Equal State-of-the-Art Value

Introduction

Features

Specifications

Ordering Information

Introduction

The state-of-the-art Fluke 76 is the lowest-priced member of Fluke's growing family of true-rms multimeters. If you design, install or maintain today's electrical systems, you know that non-linear loads are a fact of life. Measuring these non-linear loads with an average responding meter can give you readings that are 40% or more in error. The Fluke 76 true-rms meter delivers the accuracy, dependability and safety required in today's electrical environment.

The Fluke 76 combines true-rms capability with all the features of the high-performance models of the 20/70 Series II meters, including:

Capacitance from 99.99 nF to 9999 µF
Frequency of voltage from 1 Hz to 20 kHz
Lo-Ohms range with Fluke's proprietary Zero Calibration, offers 0.01Ohm resolution with increased noise rejection. Useful for checking contact resistance in motor starters and circuit breakers, or for contractors to estimate cable length.
Fast 63-segment analog bar graph and 4000-count digital display, with an update rate of 40 times per second - as fast as the eye can see. This combination of speed and high resolution is ideal for detecting fast changing signals.
Smoothing™, for stable readings of a varying signal, displays a running average of 8 normal inputs.

The Model 76 fully conforms to the latest international safety standards, including Overvoltage Category III - 600V, for severe overvoltage transients to 6000V, as defined by IEC 1010-1.

Features

Features	76
True-rms	•
Digital Display/Counts	4000
Analog Bar Graph/Segments.	63
AC & DC Voltage	•
AC & DC Current	•
Resistance	•
Diode Test	•
Fast Continuity Beeper	•
Auto and Manual Ranging	•
Automatic TouchHold®	•
Sleep Mode	•
Lo-ohms	•
Frequency of voltage	•
Capacitance	•
Smoothing™	•

Specifications

Function	Range and Resolution	76 Best Accuracy
VDC	40.00 mV, 400.0 mV, 4.000V, 40.00V, 400.0V, 600V	±(0.3%+1)
VAC	400.0 mV, 4.000V, 40.00V, 400.0V, 600V	±(1.5%+2)
ADC	4.000 mA, 40.00 mA, 4.000A, 10.00A*	±(0.5%+2)
AAC	4.000 mA, 40.00 mA, 4.000A, 10.00A*	±(1.5%+2)
Resistance	400.0Ohms, 4.000 kOhms, 40.00 kOhms, 400.0 kOhms, 4.000 MOhms	±(0.4%+1)
	40.00 MOhms	±(1%+3)
Lo-Ohms	40.00Ohms, 400.0Ohms	5% typical
Capacitance	99.99 nF, 999.9 nF, 9.999 µF, 99.99 µF, 999.9 µF	±(1.9%+2)
	9999 µF	10% typical
Frequency	99.99 Hz, 999.9 Hz, 9.999 kHz, 20 kHz	±(0.01%+1)
Crest Factor	Maximum input signal CF (increases as reading goes down-scale)	<= 3 at full scale <= 6 at half-scale

*10A Continuous, 20A for up to 30 seconds

Accessories and Ordering Information

Included Accessories

The Fluke 76 includes a pair of safety-designed TL75 right-angled test leads, operators manual, battery and C70Y yellow holster with Flex-Stand™

Ordering Information

Model	Description
Fluke 76	True-rms Multimeter with Holster

Recommended Accessories

Models	80i400	C17Y	TL20
Description	Clamp-on AC Current Probe	Hard Case	Industrial Test Lead Set

Digital Multimeters	Clamp Multimeters	Graphical Multimeters
Accessories	Application Note 1	Application Note 2
HOME PAGE	Application Note 3	Application Note 4
Fluke MENU

Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

© 2007 Industrial Electronics By Ross LLC
©2003-2006 SEO by synscon.com
Search Engine Marketing Company