Welcome to Philmore Products

Industrial Electronics Distribor of Fluke Call: 414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.


POTENTIOMETERS, trimmers

24mm (diameter) Linear Taper potentiometers. Rated from 1K through the 250K (at) 0.5 watt. Rating for the the 500K and 1 Meg is 0.25 watt.  voltage: 250V DC (Mounting nut and washer are included.) Rotational stop shaft with flat for knob with set screw or spring. Tolerance 20%

Solder type terminals, shown first above and PC Combo terminals in second photo. Note: COMBO terminals are made to be used easily as PC board mounting or solder type. Note: COMBO terminals are made to be used easily as PC board mounting or solder type.

Philmore Part no. (linear) resistance value Switch on unit? Terminal Style
PC31 500 ohm no Combo
PC22 1K no solder lug
PC23 5K no solder lug
PC24 10K no solder lug
PC245 10K yes combo
PC25 50K no solder lug
PC26 100K no solder lug
PC27 500K ohms no solder lug
PC275 500K yes combo
PC28 1 megohm no solder lug
PC285 1 megohm yes combo

(see photos above; same style case is used for the audio taper potentiometers.)

24mm (diameter) Audio Taper Potentiometers. Available in various resistances from 1K through one megohm (at) 0.5 watt. Rating for the the 500K and 1 Meg is 0.25 watt.  voltage: 250V DC (Mounting nut and washer are included.) Rotational stop shaft with flat for knob with set screw or spring. Tolerance 20%.
 

  AUDIO TAPER TYPE    
Philmore No.
(AUDIO TAPER)
resistance value Switch on unit? Terminal tyle
PC325 1K yes combo
PC32 1K no combo
PC335 5K yes combo
PC33 5K no combo
PC34 10K yes combo
PC345 10K yes combo
PC35 50K no combo
PC355 50K yes combo
PC36 100K no combo
PC365 100K yes combo
PC37 500K no combo
PC375 500K yes combo
PC38 1Meg  no combo
PC385 1Meg yes combo

Note: COMBO terminals are made to be used easily as PC board mounting or solder type.

 


  16mm AUDIO Taper potentiometers.

 

 Rated wattage: 0.1 watt. Rated voltage: 200V DC (Mounting nut and washer are included.) Rotational stop shaft with flat for knob with set screw or spring. All of the potentiometers in the following chart have "Combo" terminals except for number PC825 which has solder lug style terminals and will not fit into a PC board.

Tolerance at rated resistance is 20%; maximum voltage for the linear types is 150V AC and for the Audio tapers is 200V AC. Power rating for linear units is 200mA and for Audio Taper units is 100mA. Switch rating is universally 1.0Amps at 12V DC or 125V AC. Total rotation is 300 degrees. Rotation life cycles is 15,000 cycles. Busing diameter 7mm, Shaft length is 30mm and 12mm with flat.

Philmore
Part no.

resistance
value
Taper (audio/linear) Integral SWITCH
PC72 1K linear NO
PC725 1K linear yes
PC82 1K audio no
PC825* 1K audio yes
PC73 5K audio no
PC83 5K audio no
PC835 5K audio yes
PC74 10K linear no
PC745 10K linear yes
PC84 10K audio no
PC845 10K audio yes

 

Note: COMBO terminals are made to be used easily as PC board mounting or solder type.

Part no. resistance value taper
(audio/video)
Integral Switch
PC75 50K audio no
PC85 50K audio no
PC855 50K audio yes
PC76 100K audio no
PC86 100K audio no
PC865 100K audio yes
PC77 500K linear no
PC775 500K linear yes
PC87 500K ohms audio no
PC875 500K audio yes
PC88 1 megohm audio no
PC885 1 megohm audio yes

 

Sub-Miniature Trimmer Potentiometers

Philmore
Part no.
Resistance
(Ohms)
PC300 300
PC500 500
PC1K 1,000
PC2K 2,000
PC5K 5,000
PC10K 10,000
PC30K 30,000
PC50K 50,000
PC100K 100 K ohms
PC500K 500 K ohms

small pot.jpg (3595 bytes)Small, PC board mounting pots
with linear resistance across their ranges.
Carbon film with wiper. Mounting between leads: 0.20" center to center. Adjust with small, flat blade screw drive or alignment tool. Pot has rotation stop.

Fader Pot.jpg (14702 bytes)

 

 

FADER  potentiometer for AUDIO.
These are 1 1/8" in diameter pots intended for use as faders in audio systems.
Supplied with knob and mounting hardware; terminals are solder type. Solder type terminals.

Philmore part no.   Description
W28 20 ohm
W30 100 ohm

68-050.jpg (23653 bytes)

20 Turn Vertical Mount Cermet Trimming Potentiometers.
A cermet element is generally more stable and easier to set than wirewound, cabon or metal film types. Settable to within a 0.01% variance. Lead spacing is on 0.10" centers; size is 9mm X 9mm X 4.5mm. Adjustment via slotted screw adjustment on top. Power handling up to 0.50 watts.
PRICE: One unit per package of the following 68-series items $1.95 each suggested retail.

 

Part number value (ohms) Vertical Trimmers   Part number value (ohms)
68-050 50 68-103 10,000
68-100 100 68-203 20,000
68-200 200 68-503 50,000
68-500 500 68-104 100,000
68-102 1000 68-254 200,000
68-202 2000 68-504 500,000
68-502 5000 68-105 1 megohm

Note: add a "B" suffix to the part number for "bulk" stock. Above Pots are packaged for display, 1 per blister card.

89-050.jpg (32339 bytes)

20 Turn Horizontal Mount Cermet Trimmer Potentiometers  A cermet element is generally more stable and easier to set than wirewound, carbon or metal film types. Settable to within a 0.01% variance. Lead spacing is on 0.10" centers; size is 9mm X 9mm X 4.5mm. Adjustment via slotted screw adjustment on top. Power handling up to 0.50 watts.
PRICE: One unit per package of the following 89-series items $1.95 each suggested retail.

Part number value (ohms) Horizontal Part number value (ohms)
89-050 50 Trimmers 89-103 10,000
89-100 100 89-203 20,000
89-200 200 89-503 50,000
89-500 500 89-104 100,000
89-102 1000 89-254 200,000
89-202 2000 89-504 500,000
89-502 5000 89-105 1 megohm

Note: add a "B" suffix to the part number for "bulk" stock. Above Pots are packaged for display, 1 per blister card.

 

Industrial Electronics Distribor of Fluke Call: 414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.
© 1995-2007Industrial Electronics By Ross LLC
© 2003-2007 Sites Updated, Maintained & Promoted By : Synchrosys