Welcome to Philmore Products

FUSE, FUSES, and FUSE HOLDERS.

AGC type FUSES (1/4" X 1-1/4")
AUTOMOTIVE GLASS FUSES.
A standard for many years, used commonly in automobiles and many home electronics devices. All rated at 250 Volts AC under the industry "Grade A" test conditions and values up to seven (7) amps are UL Listed. All numbers in this series are packaged five (5) fuses in a display package.

EUROPEAN GMA type FUSES
Replacement fuses for equipment from Europe, size 5.0mm diameter  X 20 mm length. All are rated at 250 volts AC and all numbers shown here are for a five pack of fuses.

In-line BLADE TYPE FUSE HOLDER no. FH101
Simple fuse holder accommodates the blade type fuses used in automobiles.
Cut and strip the wire, insert into your circuit. Made of tough bakelite, rated 250VAC/30Amps, color black.

PANEL MOUNT FUSE HOLDER for AGC types no. FH55 (screw cap).
    Fuse holder accommodates one automotive glass type fuse size 1/4" X 1-1/4". Mounts in 19/32" diameter hole in panels up to 1/4" thickness. Overall length is 2", length protruding behind panel is 1-3/8". Rated 15 Amps (at)250 Volts AC maximum. Supplied bulk packaged only.

PANEL MOUNT FUSE HOLDER for AGC FUSE types (screw cap). 
   

                                                  HEAVY DUTY 10 AMP In-Line FUSE HOLDERS
Rated at 10 amperes, 250 Volts AC and available in two sizes.
    No. 506 for 3AG type fuses which are 1/4" X 1-1/4"
    No. 507 for GMA type fuses which are 5.0mm X 20mm

                    In-Line Fuse Holder no. FH65
    A spring loaded, twist lock plastic holder that provides a fully insulated enclosure for 1/4" x 1-1/4" AGC type fuses. Ten inch #18 stranded lead wire each end. Available in bulk only. 

FUSE PULLER and Insertion tool no. P100

    A durable tool useful for pulling either 5mm or 1/4" glass fuse types as well as blade style (automotive) fuses with the other end.

Open style FUSE HOLDERS
Typically used inside equipment, mounted on the PC board or chassis. All four types have nickel or tin  plated spring contacts made of brass. All have a center hole for mounting with an eyelet: those with PC mounting type legs can simply be soldered into the PC board. Insulating platform is Phenolic or fiberglass.