3M(TM) Adjustable Wrist Strap.
The adjustability of these wrist straps ensure a comfortable, custom fit. They have a conductive interior that dissipates static from personnel before it can damage devices being handled. Cords come in varying lengths and sets include an alligator clip which fits over the installed banana jack on the ground cord, providing an alternative ground method. UL Listed.
3M(TM) Adjustable Wrist Straps
3M(TM) Metal Wrist Strap.
These strap feature Speidel metal expansion bands for durability and comfort. Each link capped with an insulative plastic cap. They are compatible with the 3M(TM) Wrist Strap Ground Cords 2210, 2220 and 2240.
3M(TM) Wrist Strap Ground Cords.
Highly durable with segmented strain relief and a single bundle of tensile conductors laced for great strength and reinforced with strong synthetic fibers. Each cord has a one megohm resistor molded into the snap end.
3M(TM) Disposable Wrist Strap.
Cost-effective and reliable static protection for less cost. Suited for shipment with components to ensure protection at the receiving end or for short-term use in the plant for visitors. The hypo-allergenic adhesive provides 360 degree contact with the skin to minimize skin-to-band resistance. Adhesive on the copper foil adheres to any convenient electrical ground.
3M(TM) Continuous Workstation Monitor and Wrist Strap Monitor.
The Workstation Monitor uses a DC current to make a resistance determination. It continuously pulses a signal which is returned to the monitor through a special wrist strap and cord that contain two separate sets of independent conductors. It measure operator resistance to ground, has a resistor by-pass warning, uses a safe, low current signal pulse, provides dual ground paths, and has a passive system actuation. The unit also monitors its own connections to ground and the grounding of a work surface.
3M(TM) Dual Conductor Remote Input Jack.
May be purchased as replacement parts for the discontinued 3M(TM) Workstation Monitor 720 or for grounding personnel at non-monitored locations. An extra jack can be added to the monitor to provide right- and left-handed access (only one jack should be used at a time).
3M(TM) Monitor Stand-By Jack.
Jack allows operator to disconnect ground cord from wrist strap and leave station without deactivating the 722 monitor.
3M(TM) Monitor/Table Mat Replacement Cord.
Replacement conductor cord that extends from the 3M(TM) Workstation Monitor 722 to the static control work surface to be monitored. This cord does not have a resistor molded into the snap fastener cap.
3M(TM) Dual Conductor Fabric Wrist Strap.
The dual conductor wrist strap permits monitoring resistance to ground of the operator. These straps are segmented for strain relief, comfortable, brightly colored fabric. Used exclusively with the 722 Workstation Monitor and 3M(TM) Wrist Strap Monitor 721.
3M(TM) Dual Conductor Metal Wrist Strap.
The long-lasting metal bands with dual grounding cords permit monitoring of resistance to ground of the operator. Used exclusively with the 3M(TM) Workstation Monitor 722 and 3M(TM) Wrist Strap Monitor 721.
3M(TM) Dual Conductor Wrist Strap Ground Cords.
For use exclusively with 3M(TM) Fabric Dual Conductor Wrist Straps and 3M(TM) Metal Dual Conductor Wrist Straps.
3M(TM) Velostat(TM) Disposable Ground Strap.
Strap provides path for static charge to drain to ground when wearing shoes with insulative soles. Strap is sufficient to protect personnel from dangerous electrical shocks while allowing instantaneous dissipation of static charge.
3M(TM) Heel Grounding Assembly.
This long-lasting assembly effectively grounds personnel when they are in contact with conductive flooring. One size fits most shoes and boots, with a comfortable elastic ankle strap. Available with or without one megohm current limiting resistor.
3M(TM) Toe Grounding Assembly.
Designed for use with high-heeled shoes, this assembly grounds personnel when they are in contact with conductive flooring. A comfortable elastic ankle strap and 12-inch long conductive ribbon for insertion into the shoe complete the ground path to the operator. To be effective, the shoe grounders must be worn on both feet.
3M(TM) Static Control Strip.
The 9250 prevents garbled data, loss of memory, lock-up, and other problems caused by static electricity. Static charge drains harmlessly from the operators body each time the hand comes in contact with the strip. It is adhesive backed for each attachment to keyboard. Check for availability, is to be discontinued.
3M(TM) Static Control Keyboard Pads.
Static control pads create a static free environment, cushion your equipment and reduce noise.
© 1995 3M. All rights reserved.
|Adhesives, Cleaners & Compounds
|Breadboards & Test Clips
|Static Control Products