Logo Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.


Distributors for


Adhesives



3M(TM) Spray Adhesives
A variety of spray adhesives from repositionable to high tack, to high strength. All with a variable spray width, no meth. chloride, 1.1.1.-trich or chlorofluorocarbons.

3M(TM) Pronto(TM) Instant Adhesives
One-component, high-strength, very fast setting, multi-purpose cyanoacrylate adhesive that cures at room temperature with very low pressures. They are very economical to use because generally only drops of adhesives are needed to develop strong bonds to metals, plastics, and rubber. They have particularly good adhesion to cured rubbers. Meets MIL-A-46050C, Type II, Class 2.

3M(TM) Pronto(TM) Instant Adhesive CA-40H & CA-100
These are one-component, high-strength, cyanoacrylate adhesives. CA-40H's higher viscosity, slightly slower setting rate than CA-40 gives it good adhesion to difficult bond substrates such as aluminum, EPDM rubber, flexible vinyl as well as resistance to soap and isopropyl alcohol. CA-100's relatively high viscosity (3,000 cps) allows gap filling up to 0.020". It has high T-peel strength and thermal shock resistance. Both meet MIL-A-46050C, Type II, Class 3.

3M(TM) Pronto(TM) Gel Instant Adhesive CA-50
CA-50 gel is a one-component, high strength, surface insensitive, gel Cyanoacrylaate adhesive. Gel consistency allows it to be used in non-sag vertical applications and to fill up to .020 inches. Its very slow cure rate allows maximum time to reposition parts.

3M(TM) Scotch-Grip(TM) High Performance Contact Adhesive
1357 is a gray-olive colored, high performance contact adhesive that provides a long bonding range and excellent initial strength. It adheres exceptionally well to decorative plastic laminates, paper honeycomb, rubber, cloth, metal wood and foamed glass. It meets requirements of MIL-A-21366A and MMM-A-121.

3M(TM) Scotch-Seal(TM) Sealant

3M(TM) Scotch-Grip(TM) Rubber & Gasket Adhesives
These premium quality adhesives rapidly develop strength and bond to a variety of surfaces including most plastics and rubbers. 1300 is yellow, versatile, heat resistant, and also adheres to metal and wood. 847 is reddish brown, multi-purpose, flexible, also adheres to gasketing materials and leather, and resists fuels and oils.

3M(TM) Scotch-Weld(TM) Epoxy Adhesives & Applicators
Very clear, fast setting, room temperature curing, two-part adhesive bonding a variety of materials such as metals, ceramics, wood, and many plastics in approximately 5 minutes. Its low viscosity allows easy pouring and is ideal for filleting and potting. Packaged in convenient duo-pack cartridges designed for use in the EPX applicator system. Meets corrosion requirements of MIL-S-46163.

3M(TM) Jet-melt(TM) (Hot Melt) Adhesive System
High performance hot melt adhesive bonds plastics including polyethylene and polypropylene. Excellent thermal shock, good heat resistance and electrical properties, non-corrosive. High reliability for rigidization of printed wiring board components and other electronic applications. Polygun TC applicator has touch control and provides quick reloading with cartridge holder. 50% higher flow than similar sized handguns.

Scotch(TM) Tape Primer
Tape primers are aerosol surface preparations intended to increase the bond of pressure-sensitive tapes. Proven on various surfaces (wet or dry) including oily metal, concrete, wood, various plastics, rubber, fiberglass and glass, they work with most pressure-sensitive tapes. 82 must be sprayed in the inverted position. Use with the 3M Lane Marking Applicator for easy lane marking (see Identification Products section).

3M(TM) Plastic Adhesives

3M(TM) Super Glue
For quick repair of glass, china, jewelry, balsa wood, rubber, and rigid plastics. Non-drip, gel formula in a tube that gives a strong bond.

3M(TM) Super Strength Adhesive
For glass, china, fabric, leather, many plastics and wood \M for most household repairs. Provides a strong bond, with no clamping and is top rack dishwasher safe.

3M(TM) Counter Top Cement
Contact cement for repairing Formica(TM) counter tops and other plastic laminates. Strong bond, water and heat-resistant. Before applying, clean surface and allow to dry thoroughly. Avoid contact with skin.

3M(TM) Glue Sticks


© 1995 3M. All rights reserved.


Bullet Adhesives, Cleaners & Compounds Bullet Breadboards & Test Clips Bullet Connectors
Bullet IDC Cables Bullet Static Control Products Bullet Tapes
Bullet HOME PAGE Bullet 3M MENU

Logo Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.


© 2007 Industrial Electronics By Ross LLC