Home | Products | AIROTRONICS RELAYS | Motion Detectors

Motion Detectors

Font size: Decrease font Enlarge font

TGMPL series Cube Relay Single Shot timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2” x 2” configuration. These units provide the same functional performance as plug-in relay timers, but at significant cost savings.

TGMPL Timers - MISSING PULSE DETECTOR / WATCHDOG

TGC Delay on Make Relay Timer 10-30 Amps

Timing Mode

Input voltage is applied continuously - when control switch closes the relay transfers, if switch closures happen within set time period, relay stays closed. If control switch stays closed or open longer than set time, relay opens.

Cube Relay, 10-30 Amps, Timer with Relay Output

Features

  • High current-carrying capacity up to 10 amps
  • Transient protected
  • 100% Load isolation
  • No leakage in N.O. position
  • No heat sinking required
  • Available in any time delay period required
  • Digital CMOS timing
  • No minimum load required
  • Totally encapsulated for protection from harsh environments
  • 100% Operational testing before shipping
  • RoHS compliance available
Basic Wiring and Dimensions
Solid State DC Voltage
Specifications
  • Input Voltage
VDC: 12, 24 or 48
VAC: 24, 48, 120 or 230, 50/60Hz
  • Time Delay 
Timing Mode: Pulse Detector
Type: Digital CMOS
Time Range: 0.2 second to 24 hours
Time Adjustments: Factory-fixed time period; variable, with adjustments on timer, or terminals for external resistor or potentiometer
  • Repeatability
±0.5%
  • Setting Accuracy
Fixed time period: ±10% of nominal time
Variable time range: +15% -5% max. time,-10% min. time
  • Reset/Recycle Time
25 milliseconds
  • Initiate Time
6 milliseconds or less
  • Relay Life Expectancy
Mechanical: 20 million operations
Electrical: 100,000 operations at maximum load
  • Protection 
Polarity Protection: All DC units have reverse polarity protection
Transient Protection: 18 joules
Dielectric Strength: 1800V RMS 60Hz
  • Temperature Ranges 
Storage: -40°C to +85°
Operating: -25°C to +65°C
  • Physical Data 
Mounting: Surface with one #8 screw
Connection & Termination: 0.25" quick connects

Note: When using a proximity switch for control unit, a snubber may be required to bypass leakage current

Data Sheet:


 


 

  • email Email to a friend
  • print Print version
  • Plain text Plain text
Catalog, Quote, availability
Our Contact

Call: 414-327-1555

Fax : 414-327-0577

Use our handy short Form.Catalog, Quote, Availability.