26 Surface Mount LED Flexible Strips and Accessories
Voltage
RoHS
Spec Sheet(s)
12V
Yes
12V
Yes
12V
Yes
12V
Yes
12V
Yes
Features:
- The LED light module consists of a maximum of 26 high-brightness PLCC-2 SMD
- LEDs mounted on flexible PCB with self-adhesive backing
- Each LED has a 120° viewing angle for even light distribution
- Length of each module can range from 28mm (2 LEDs) to 364mm (26 LEDs)
- Up to 10 full modules (364mm, 260 LEDs) can be connected to one power supply
- Wiring connections should only be made on the designated soldering pads (marked "+/- 10 or 12V").
- Soldering process should not exceed 10 seconds at 260°C.
- Module can be trimmed to the desired length by cutting along the marked line between the soldering pads.
- The power supply should be connected near the middle of the module strip.
- The power supply should contain an appropriate fuse to insure the electrical current does not exceed maximum tolerance of the light modules.
- The module should not be exposed to humid or dusty environments. Additional protection may be necessary for use in harsh conditions.
- The minimum bend radius of the PCB is 2cm. Sharp bends should not be made near an LED or electronic component.
- PC26M - Middle Connector for 14" LED Strip
- PC26C - Corner connector with wire leads for
- 14" LED Strip
Flexible LED Strip Reels
Voltage
RoHS
12V
Yes
12V
Yes
12V
Yes
12V
Yes
Voltage
RoHS
12V
Yes
12V
Yes
12V
Yes
12V
Yes
- 12V VDC Operation (9V-14.8V)
- Flexible Light Strip
- Waterproof and Non-Waterproof Versions
- 300 High Power LEDs (150 for RGB)
- Sold in 5m (16.4'/197") reels with wire leads on each end
- Can be cut every 3 LEDs
- RGB Operates with any IC controller
- Wavelengths (nm): R:620~625/G:515~520/B:468~472
- MC300 - Motion Controller Box with Remote
- PC100 - LED Plastic Channel
- PC110 - Dimmer
- DC100 - DC Coaxial Jack
- AD2 - 2Amp Adapter
- AD4 - 4Amp Adapter (connects up to 2 reels)
- PC300E - End connector with wire leads for LED reels
- PC300C - Corner connector with wire leads for LED reels
- PC300M - Middle Connecter for LED reels
- PC150E - End connector with wire leads for RGB LED reels
- PC150C - Corner connector with wire leads for RGB LED reels
- PC150M - Middle Connecter for RGB LED reels
- Operation Temperature: -25~+60 (°C)
- Storage Temperature: -40~+80 (°C)
- No RF Interference
- Lifetime: >50,000 Hours
- Power Use - 12V, 2.4Amps per Reel
LED Rope Lights
Features:
- 120V Operation
- Flexible Tube Lighting
- Indoor/Outdoor Use
- 0.8 Watts per Foot
- One Lamp per Inch
- 1/2" Diameter
- 100,000 Life Hours
- Pre-Tested
- Can be cut every 3 feet as marked
- MC-2 - Motion Controller Box
- PC-2 - Power Cords
- SC-2 - Splice Connectors
- EC-2 - End Caps
- MC-3 - Mounting Clips