Home | Products | FINDER RELAYS | Relays

Relays

 

Versions: 

 

  • Type 11.31 Only 17.5 mm wide 
  • Type 11.41 "Zero hysteresis" 
  • Type 11.42 Two independent outputs 
  • Type 11.91 Light dependent relay & time switch integrated 
  • LED status indication 
  • Double insulation between supply and photosensor 
  • 35 mm rail (EN 60715) mount 
  • Cadmium free contact material 
  • Cadmium free photo sensor (IC photo diode)
19 Series - Override and status indicating modules
ideally suited for use in conjunction with Building Management Systems (BMS), Direct Digital Controllers (DDC), or in combination with PLC's. 
  • Status/Errors LED indications of PLC or BMS
  • Manual bypass of PLC/BMS 
  • 7 different types of module available: 
Status indicating modules 
  1.  
    1.  Type 19.31, 1-channel status indicating module 
    2.  Type 19.32, 2-channel status indicating module Override control modules 
    3.  Type 19.21, Auto/Off/On output module 
    4.  Type 19.41, Override module - Auto/Off/Hand 
    5.  Type 19.42, Override module - Auto/Off/Low/High Analogue
Override control module 
  1.  
    1.  Type 19.50, Analogue output module (0…10) V Power relay module 
    2.  Type 19.91, Power module for high current inrush loads
  • 35 mm rail (EN 60715) mounting
S19

Type 1T.31 - Room Termostat
  • Temperature range (+5...+37°C ) 
  • Supply voltage: 3 V DC (2 batteries alkaline 1,5 V type LR6)
  • Summer/Winter switch
  • 1 change over 5A 230V 
  • For wall mounting
  • 18 mm thickness
S1T31

7P Series - Surge Protection Device (SPD)
Protects equipment against overvoltage caused by lightning strikes or switching transients
  • Type 2 Surge arrester for single phase Systems 
  • Type 2 Surge arrester for three-phase systems 
  • Type 3 Surge arrester for incorporation within socket outlets 
  • Visual indication of Varistor status - Healthy/Replace 
  • Remote signalling contact of Varistor status Connector (07P.01) included 
  • Replaceable modules 
  • Complies with EN 61643-11 
  • 35 mm rail (EN 60715) mounting 
S7P