Home | Products | AIROTRONICS RELAYS | Flashers

Flashers

TGC Delay on Make Relay Timer 10-30 Amps
Timing Mode
Application of input voltage to the timer starts the “On” time delay. At the end of the “On” time delay, the “Off” time delay starts. At the end of the “Off” time delay, the load is again energized, the timer returns to the “On” time delay, and the cycling continues as long as input voltage is applied. Removal of the input voltage resets the timer.

Cube Relay, 10-30 Amps, Timer with Relay Output

Features:

  •     Digital timing, solid state output
  •     1 Amp current load handling
  •     10 Amps single-cycle surge handling
  •     4 Overlapping AC voltage ranges (from 19to 277 volts) plus 19-48 VAC/VDC
  •     ±0.1% Repeat accuracy
  •     Virtually unlimited time ranges
  •     Factory-fixed or variable timing adjustment
  •     Totally encapsulated for protection from harsh environments
  •     O-ring sealed exposed controls
  •     Single screw mounting through center mounting hole
  •     Standard 6.35mm (0.25") quick connect blade terminals
  •     100% Operational testing before shipping
  •     RoHS compliance available
Basic Wiring and Dimensions
Solid State DC Voltage
Specifications:
  •     Input Voltage
      VAC: 19 thru 277, 50/60Hz
      VDC: 19 to 48
  •     Repeat Accuracy
      ±0.1% under fixed conditions
  •     Time Ranges
      0.1 sec. to 24 hours (1 sec., 10 sec., 100 sec., and 1000 secs. are standard)
      Special time ranges available upon request
  •     Reset/Recycle Time
      100 milliseconds
  •     Tolerances
      Fixed: ±10% of nominal time
      (optional: ±5%, ±1%)
      Variable: -0%, +15%
      Limit: -10% at minimum time
  •     Recycle Effect
      None
  •     Temperature Ranges
      Storage: -40°C to +85°C
      Operating: -25°C to +65°C
  •     Life Expectancy
      No predictable failure if used within operating parameters
  •     Protection
      Polarity Protection: All DC units have reverse polarity protection
      Transient Protection: 18 joules
      Dielectric Strength: 1800V RMS 60Hz
  •     Power Requirement
      0.25 watts max.
  •     Weight
      3oz. (85g) maximum
  •     Solid State Output
      SPST (N.O.)
  •     Load Current
      1 amp continuous, 10 amps single-cycle surge
  •     Time Cycle Interrupt (Input Voltage Break)
      Resets timer to original state

Data Sheet: