Electronic Supply by Industrial Electronics in Milwaukee Wisconsin : Potter Brumfield, Radio Shack Stores in Milwaukee: Kester Solder

Kester Solder
================================================================================
Staff  on 23/10/2009 22:12:00

Kester Solder NTE Electronics

For anyone that has used fine solder wire, you know that a 1 pound (453 gram)
spool
literally lasts forever.
For this reason industrial Electronics is now offering Kester Lead free solder
in new smaller quantities of  Silver solder in 100 gram and 250 gram per spool
on select Kester fine solder wire.
This will help to save considerable waste, reduce inventory costs, and minimize
out of
date product.
The following fine silver solder wires are available in .010" (.25mm), .015"
(.38mm), & .020" (.50mm) with Alloy of tin 96.5 sliver 3.0 and copper .5  Sn96.5
Ag3.0 oCu0.5
diameters, in either 100 or 250 gram spools.
275 NO-CLEAN CORED WIRE FOR LEAD-FREE AND LEADED ALLOYS
Product Description
Kester 275 Flux for cored solder wire was developed to provide superior wetting
performance for hand soldering in the electronics industry. The chemistry is
based on some of the same principles that have been safely used for years in
mildly activated rosin fluxes. The use of 275 results in an extremely clear
post-soldering residue without cleaning. The unique chemistry in 275 was also
designed to reduce spattering common to most core fluxes. 275 can be used for
both lead bearing and lead-free soldering.
Performance Characteristics:
*Colorless translucent residues 	*Improves wetting performance 	*Excellent
solderability and fast 	*wetting to a variety of surface fin- ishes
*Eliminates the need and expense of cleaning 	*Low smoke and odor  	*Low
spattering 	*Compatible with leaded and lead- free alloys 	*Classified as ROL0
per J-STD-004 	*Compliant to Bellcore GR-78
Solder iron tip temperatures are most commonly between 315-343°C (600-650°F)
for Sn63Pb37 and Sn62Pb36Ag02 alloys, and between 371-400°C (700-750°F) for
lead-free alloys. Heat both the land area and component lead to be soldered with
the iron prior to touching the land with the cored wire. Do not apply the wire
directly to the soldering iron tip. If needed, Kester 959T or 958M no clean flux
may be used as a compatible liquid flux to aid in reworking soldered joints.
Kester 959T is available in Flux-Pen(R) for optimum board cleanliness.
Call 414-327-1555 or email iebyross@yahoo.com for price and availability
Products:
*Wire Solder 	*Water Soluble Fluxes 	*Bar Solder 	*Rosin Based Fluxes 	*No-clean
Fluxes 	*Residue Cleaning Solutions 	*Flux Pens 	*Counter Displays 	*Solder
Paste 	*Solder Analysis Programs 	*Carded Products 	*NTE SolderWick 	*New Lead
Check(tm)
Catalog: