Electronic Supply by Industrial Electronics in Milwaukee Wisconsin : Potter Brumfield, Radio Shack Stores in Milwaukee: Relays

Relays
================================================================================
Staff  on 21/01/2010 02:37:00

11 Series - Modular Light dependent Relays Finder Relays Industrial Electronics;
19 Series - Override; Type 1T.31 - Room Termostat; 7P Series - Surge Protection
Device (SPD)

VERSIONS:
*Type 11.31 Only 17.5 mm wide  	*Type 11.41 "Zero hysteresis"  	*Type 11.42 Two
independent outputs  	*Type 11.91 Light dependent relay & time switch integrated
 	*LED status indication  	*Double insulation between supply and photosensor 
	*35 mm rail (EN 60715) mount  	*Cadmium free contact material  	*Cadmium free
photo sensor (IC photo diode)
19 Series - Override and status indicating modules ideally suited for use in
conjunction with Building Management Systems (BMS), Direct Digital Controllers
(DDC), or in combination with PLC's.
*Status/Errors LED indications of PLC or BMS 	*Manual bypass of PLC/BMS  	*7
different types of module available:
Status indicating modules
*
* Type 19.31, 1-channel status indicating module  	* Type 19.32, 2-channel
status indicating module Override control modules  	* Type 19.21, Auto/Off/On
output module  	* Type 19.41, Override module - Auto/Off/Hand  	* Type 19.42,
Override module - Auto/Off/Low/High Analogue
Override control module
*
* Type 19.50, Analogue output module (0…10) V Power relay module  	* Type
19.91, Power module for high current inrush loads
*35 mm rail (EN 60715) mounting
Type 1T.31 - Room Termostat
*Temperature range (+5...+37°C )  	*Supply voltage: 3 V DC (2 batteries
alkaline 1,5 V type LR6) 	*Summer/Winter switch 	*1 change over 5A 230V  	*For
wall mounting 	*18 mm thickness
7P Series - Surge Protection Device (SPD) Protects equipment against overvoltage
caused by lightning strikes or switching transients
*Type 2 Surge arrester for single phase Systems  	*Type 2 Surge arrester for
three-phase systems  	*Type 3 Surge arrester for incorporation within socket
outlets  	*Visual indication of Varistor status - Healthy/Replace  	*Remote
signalling contact of Varistor status Connector (07P.01) included  	*Replaceable
modules  	*Complies with EN 61643-11  	*35 mm rail (EN 60715) mounting