Electronic Supply by Industrial Electronics in Milwaukee Wisconsin : Potter Brumfield, Radio Shack Stores in Milwaukee: Motion Detectors

Motion Detectors
================================================================================
Staff  on 17/09/2009 03:13:00

TGMPL series Cube Relay Single Shot timers are a unique combination of digital
CMOS timing circuitry with a relay output in a compact 2” x 2”
configuration. These units provide the same functional performance as plug-in
relay timers, but at significant cost savings.

TGMPL Timers - MISSING PULSE DETECTOR / WATCHDOG
Timing Mode
Input voltage is applied continuously - when control switch closes the relay
transfers, if switch closures happen within set time period, relay stays closed.
If control switch stays closed or open longer than set time, relay opens.
Features
*High current-carrying capacity up to 10 amps 	*Transient protected 	*100% Load
isolation 	*No leakage in N.O. position 	*No heat sinking required 	*Available
in any time delay period required 	*Digital CMOS timing 	*No minimum load
required 	*Totally encapsulated for protection from harsh environments 	*100%
Operational testing before shipping 	*RoHS compliance available
Basic Wiring and Dimensions  Specifications
*Input Voltage
VDC: 12, 24 or 48
VAC: 24, 48, 120 or 230, 50/60Hz
*Time Delay
Timing Mode: Pulse Detector
Type: Digital CMOS
Time Range: 0.2 second to 24 hours
Time Adjustments: Factory-fixed time period; variable, with adjustments on
timer, or terminals for external resistor or potentiometer
*Repeatability
±0.5%
*Setting Accuracy
Fixed time period: ±10% of nominal time
Variable time range: +15% -5% max. time,-10% min. time
*Reset/Recycle Time
25 milliseconds
*Initiate Time
6 milliseconds or less
*Relay Life Expectancy
Mechanical: 20 million operations Electrical: 100,000 operations at maximum load
*Protection
Polarity Protection: All DC units have reverse polarity protection Transient
Protection: 18 joules Dielectric Strength: 1800V RMS 60Hz
*Temperature Ranges
Storage: -40°C to +85°
Operating: -25°C to +65°C
*Physical Data
Mounting: Surface with one #8 screw Connection & Termination: 0.25" quick
connects
Note: When using a proximity switch for control unit, a snubber may be required
to bypass leakage current
Data Sheet: