MyPHPblog Go to Home page or Back to where you were, or VIEW blog.
[Blog Main]

KEYSTONE JACKS & INSERTS FROM PAN PACIFIC 04/28/2003 at 6:43PM by Randy
Keystone Jacks and Inserts

Part No.
Features
DC-VC3-6-(CC)
Voice Connector, Insert type, 6P6C Jack
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow)
DC-VC3-6-RD
An Example of the 6P6C Jack, Red
DC-VC3-8-(CC)
Voice Connector, Insert type, 8P8C Jack
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow)
DC-VC3-8-BL
An Example of the 8P8C Jack, Blue
DC-VC5-8A-(CC)
CAT5 110 Back Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow), OR (Orange)
DC-VC5-8A-OR
An Example of the CAT5 110 Back Term. Mod. Jack, Orange
DC-VC5-8A-(CC)-V
CAT5 110 Back Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), IV (Ivory), WH (White)
DC-VC5-8A-WH-V
An Example of the CAT5 110 Back Term. Mod. Jack, White
DC-VC5-8A-(CC)-R
CAT5 110 Right Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow), OR (Orange)
DC-VC5-8A-GN-R
An Example of the CAT5 110 Right Term. Mod. Jack, Green
DC-VC5-8T-(CC)
CAT5 110 Back Term. Mod. Jack, 568A
Colors (CC): BK (Black), IV (Ivory), RD (Red), WH (White), OR (Orange)
DC-VC5-8T-RD
An Example of the CAT5 110 Back Term. Mod. Jack, Red
DC-VC5-8T-(CC)-R
CAT5 110 Right Term. Mod. Jack, 568A
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (White), OR (Orange), YW (Yellow)
DC-VC5-8T-BL-R
An Example of the CAT5 110 Right Term. Mod. Jack, Blue
DC-VC5-8AS
CAT5 110 Back Term. Shield Mod. Jack
DC-VC2-6C-(CC)
Voice Connector, IDC type Term., 6P6C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-VC2-6C-GN
An Example of Voice Connector, 6P6C Jack, Green
DC-VC2-6D-(CC)
Voice Connector, IDC type Term., DEC Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), OR (Orange), YW (Yellow)
DC-VC2-8C-(CC)
Voice Connector, IDC type Term., 8P8C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-VC2-8C-RD
An Example of Voice Connector, 8P8C Jack, Red
DC-VC-(X)C
Voice Connector, RJ-11 Jack
(X): 6 or 8
WPP-B1-(CC)
Blank Block for Wall Plate Module
Colors (CC): IV (Ivory), WH (White)
WPP-B1-WH
An Example of Blank Block for Wall Plate Module, White
WPP-B2-(CC)
Block with 3/8" Hole For BNC or RF Feed Thru
Colors (CC): IV (Ivory), WH (White)
WPP-B2-WH
An Example of Block with 3/8" Hole, White
WPP-BNC1-(CC)
Keystone with BNC Feed Thru Module
Colors (CC): IV (Ivory), WH (White)
WPP-BNC1-IV
An Example of Keystone with BNC Feed Thru Module, Ivory
WPP-RFF1-(CC)
Keystone with F-Connector (Video) Feed Thru Module
Colors (CC): IV (Ivory), WH (White)
WPP-RFF1-IV
An Example of Keystone with F-Connector, Ivory
PT-1112-IV
Keystone Casing, Dual Ports, Ivory
PT-1124-IV
Keystone Casing, Quad Ports, Ivory
PT-111J1-IV
Single Port MOD Block Insert, Ivory
PT-111J2-IV
Dual Port MOD Block Insert, Ivory
DC-1021-6-(CC)
MOD Feed Thru 6P6C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-1021-6-YW
An Example of MOD Feed Thru 6P6C Jack, Yellow
DC-1021-8-(CC)
MOD Feed Thru 8P8C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-1021-8-WH
An Example of MOD Feed Thru 8P8C Jack, White
WPP-(X)-(CC)
Plastic Wall Plate Module
Port Options (X): 1,2,3,4,5,6 Ports
Color Options (CC): IV (Ivory), WH (White)

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

SCSI TERMINATORS 04/28/2003 at 6:43PM by Randy
SCSI Terminators

Part No.
Features
ADZ-TC50M-AC
SCSI Active Terminator Centronic 50 W/LED
ADZ-TC50M-DF
SCSI Differential Terminator Centronic 50 W/LED
ADZ-TC50M-PS
SCSI Terminator Single Side Male
ADZ-TC50M-PSL
SCSI Passive Terminator Centronic 50 W/LED
ADZ-TC50MF-AC
SCSI Active Terminator Double Side Male/Female Centronic 50
ADZ-TC50MF-PS
SCSI Terminator Double Side Male/Female Centronic 50
ADZ-TD25M-AC
SCSI DB25 Active Terminator Single End
ADZ-TD25M-PS
SCSI DB25 Passive Terminator Single End
ADZ-TD25MF-AC
SCSI DB25 Double Side Male/Female Active Terminator
ADZ-TD25MF-PS
SCSI DB25 Double Side Male/Female Passive Terminator
ADZ-TD50M-PS
SCSI Passive Terminator, DB50 Male
ADZ-THC50M-AC
SCSI 2 Active Terminator Half Pitch Centronic 50 Male
ADZ-THC50M-PS
SCSI 2 Passive Terminator Half Pitch Centronic 50 Male
ADZ-THC68M-PS
SCSI 3 Centronic 68 Pin Male Half Pitch Passive Terminator
ADZ-THD50M-AC
SCSI 2 Half Pitch DB50 Male Active Terminator Shielded
ADZ-THD50M-PS
SCSI 2 Passive Terminator, Half Pitch DB50 Pin Male
ADZ-THD68M-AC
SCSI 3 Active Terminator Half Pitch DB68 Male
ADZ-THD68M-PS
SCSI 3 Passive Terminator Half Pitch DB68 Male
ADZ-TI50M-AC
Internal SCSI ActiveTerminator, DB50 Male
ADZ-TI50M-PS
Internal SCSI Passive Terminator, DB50 Male
ADZ-TI50MF-AC
Internal SCSI Active Terminator DB50 Male/Female Dual End
ADZ-TI50MF-PS
Internal SCSI Passive Terminator DB50 Male/Female Dual End
ADZ-TIDC50-AC
Internal IDC Type Active Terminator
ADZ-TIDC50-PS
Internal IDC Type Passive Terminator

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

SCSI TERMINATORS 04/28/2003 at 6:39PM by Randy
SCSI Terminators

Part No.
Features
ADZ-TC50M-AC
SCSI Active Terminator Centronic 50 W/LED
ADZ-TC50M-DF
SCSI Differential Terminator Centronic 50 W/LED
ADZ-TC50M-PS
SCSI Terminator Single Side Male
ADZ-TC50M-PSL
SCSI Passive Terminator Centronic 50 W/LED
ADZ-TC50MF-AC
SCSI Active Terminator Double Side Male/Female Centronic 50
ADZ-TC50MF-PS
SCSI Terminator Double Side Male/Female Centronic 50
ADZ-TD25M-AC
SCSI DB25 Active Terminator Single End
ADZ-TD25M-PS
SCSI DB25 Passive Terminator Single End
ADZ-TD25MF-AC
SCSI DB25 Double Side Male/Female Active Terminator
ADZ-TD25MF-PS
SCSI DB25 Double Side Male/Female Passive Terminator
ADZ-TD50M-PS
SCSI Passive Terminator, DB50 Male
ADZ-THC50M-AC
SCSI 2 Active Terminator Half Pitch Centronic 50 Male
ADZ-THC50M-PS
SCSI 2 Passive Terminator Half Pitch Centronic 50 Male
ADZ-THC68M-PS
SCSI 3 Centronic 68 Pin Male Half Pitch Passive Terminator
ADZ-THD50M-AC
SCSI 2 Half Pitch DB50 Male Active Terminator Shielded
ADZ-THD50M-PS
SCSI 2 Passive Terminator, Half Pitch DB50 Pin Male
ADZ-THD68M-AC
SCSI 3 Active Terminator Half Pitch DB68 Male
ADZ-THD68M-PS
SCSI 3 Passive Terminator Half Pitch DB68 Male
ADZ-TI50M-AC
Internal SCSI ActiveTerminator, DB50 Male
ADZ-TI50M-PS
Internal SCSI Passive Terminator, DB50 Male
ADZ-TI50MF-AC
Internal SCSI Active Terminator DB50 Male/Female Dual End
ADZ-TI50MF-PS
Internal SCSI Passive Terminator DB50 Male/Female Dual End
ADZ-TIDC50-AC
Internal IDC Type Active Terminator
ADZ-TIDC50-PS
Internal IDC Type Passive Terminator

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

KEYSTONE JACKS & INSERTS FROM PAN PACIFIC 04/28/2003 at 6:37PM by Randy
Keystone Jacks and Inserts

Part No.
Features
DC-VC3-6-(CC)
Voice Connector, Insert type, 6P6C Jack
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow)
DC-VC3-6-RD
An Example of the 6P6C Jack, Red
DC-VC3-8-(CC)
Voice Connector, Insert type, 8P8C Jack
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow)
DC-VC3-8-BL
An Example of the 8P8C Jack, Blue
DC-VC5-8A-(CC)
CAT5 110 Back Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow), OR (Orange)
DC-VC5-8A-OR
An Example of the CAT5 110 Back Term. Mod. Jack, Orange
DC-VC5-8A-(CC)-V
CAT5 110 Back Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), IV (Ivory), WH (White)
DC-VC5-8A-WH-V
An Example of the CAT5 110 Back Term. Mod. Jack, White
DC-VC5-8A-(CC)-R
CAT5 110 Right Term. Mod. Jack, AT&T
Colors (CC): BK (Black), BL (Blue), GN (Green), IV (Ivory), RD (Red), WH (White), YW (Yellow), OR (Orange)
DC-VC5-8A-GN-R
An Example of the CAT5 110 Right Term. Mod. Jack, Green
DC-VC5-8T-(CC)
CAT5 110 Back Term. Mod. Jack, 568A
Colors (CC): BK (Black), IV (Ivory), RD (Red), WH (White), OR (Orange)
DC-VC5-8T-RD
An Example of the CAT5 110 Back Term. Mod. Jack, Red
DC-VC5-8T-(CC)-R
CAT5 110 Right Term. Mod. Jack, 568A
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (White), OR (Orange), YW (Yellow)
DC-VC5-8T-BL-R
An Example of the CAT5 110 Right Term. Mod. Jack, Blue
DC-VC5-8AS
CAT5 110 Back Term. Shield Mod. Jack
DC-VC2-6C-(CC)
Voice Connector, IDC type Term., 6P6C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-VC2-6C-GN
An Example of Voice Connector, 6P6C Jack, Green
DC-VC2-6D-(CC)
Voice Connector, IDC type Term., DEC Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), OR (Orange), YW (Yellow)
DC-VC2-8C-(CC)
Voice Connector, IDC type Term., 8P8C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-VC2-8C-RD
An Example of Voice Connector, 8P8C Jack, Red
DC-VC-(X)C
Voice Connector, RJ-11 Jack
(X): 6 or 8
WPP-B1-(CC)
Blank Block for Wall Plate Module
Colors (CC): IV (Ivory), WH (White)
WPP-B1-WH
An Example of Blank Block for Wall Plate Module, White
WPP-B2-(CC)
Block with 3/8" Hole For BNC or RF Feed Thru
Colors (CC): IV (Ivory), WH (White)
WPP-B2-WH
An Example of Block with 3/8" Hole, White
WPP-BNC1-(CC)
Keystone with BNC Feed Thru Module
Colors (CC): IV (Ivory), WH (White)
WPP-BNC1-IV
An Example of Keystone with BNC Feed Thru Module, Ivory
WPP-RFF1-(CC)
Keystone with F-Connector (Video) Feed Thru Module
Colors (CC): IV (Ivory), WH (White)
WPP-RFF1-IV
An Example of Keystone with F-Connector, Ivory
PT-1112-IV
Keystone Casing, Dual Ports, Ivory
PT-1124-IV
Keystone Casing, Quad Ports, Ivory
PT-111J1-IV
Single Port MOD Block Insert, Ivory
PT-111J2-IV
Dual Port MOD Block Insert, Ivory
DC-1021-6-(CC)
MOD Feed Thru 6P6C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-1021-6-YW
An Example of MOD Feed Thru 6P6C Jack, Yellow
DC-1021-8-(CC)
MOD Feed Thru 8P8C Jack
Colors (CC): BK (Black), IV (Ivory), BL (Blue), GN (Green), WH (Whte), RD (Red), YW (Yellow)
DC-1021-8-WH
An Example of MOD Feed Thru 8P8C Jack, White
WPP-(X)-(CC)
Plastic Wall Plate Module
Port Options (X): 1,2,3,4,5,6 Ports
Color Options (CC): IV (Ivory), WH (White)

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

PAN PACIFIC CAT5 PATCH CORDS 04/28/2003 at 6:36PM by Randy
Level 5 Data Patch Cords

Part No.
Features
DC-558P-(XX)-(CC)
8C Twisted Pair Level 5 Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
Colors (CC): BG (Beige), BL (Blue), BK (Black), GN (Green), GR (Gray), RD (Red), WH (White), YW (Yellow)
DC-558P-(XX)-BG
An Example of Beige (Light Gray) Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BK
An Example of Black Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BL
An Example of Blue Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-GN
An Example of Green Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-GR
An Example of Gray Level 5 Data Patch Cord
Length (XX): 1.5', 3', 4', 5', 6', 7', 10', 14', 15', 25', 50', 100'
DC-558P-(XX)-RD
An Example of Red Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-WH
An Example of White Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-YW
An Example of Yellow Level 5 Data Patch Cord
Length (XX): 3', 4', 5', 6', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-(CC)-M
8C Twisted Pair Level 5 Molded Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
Colors (CC): BG (Beige), BL (Blue), BK (Black), GN (Green), GR (Gray), RD (Red), WH (White), YW (Yellow)
DC-558P-(XX)-BG-M
An Example of Beige Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BK-M
An Example of Black Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-BL-M
An Example of Blue Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-GN-M
An Example of Green Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-GR-M
An Example of Gray Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-RD-M
An Example of Red Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-WH-M
An Example of White Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-YW-M
An Example of Yellow Molded Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25'
DC-558P-(XX)-(CC)-MB
8C Twisted Pair Level 5 Molded With Boots Data Patch Cord
Length (XX): 3' 5' 7' 10' 15' 25' 50' 100'
Colors (CC): BG (Beige), BL (Blue), BK (Black), GN (Green), GR (Gray), RD (Red), WH (White), YW (Yellow)
DC-558P-(XX)-BG-MB
An Example of Beige Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BK-MB
An Example of Black Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BL-MB
An Example of Blue Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-GN-MB
An Example of Green Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-GR-MB
An Example of Gray Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-RD-MB
An Example of Red Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'

DC-558P-(XX)-WH-MB
An Example of White Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-YW-MB
An Example of Yellow Molded With Boots Level 5 Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 25', 50', 100'
DC-558P-(XX)-BL-H
8C Twisted Pair Level 5 Data Patch Cord for Hub Use (Cross Wiring)
Length (XX): 1', 2', 3', 4', 5', 7', 10', 15'
Colors (CC): BG (Beige), BL (Blue), BK (Black), GN (Green), GR (Gray), RD (Red), WH (White), YW (Yellow)
DC-558PF-(XX)-MB
8C Twisted Pair Level 5 Molded Flat Data Patch Cord
Length (XX): 3', 5', 7', 10', 15', 20', 25', 35', 50', 100'

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

PAN PACIFIC SCSI ADAPTERS 04/28/2003 at 6:35PM by Randy
SCSI ADAPTOR SERIES

Part No.
Features
ADZ-C50F-D25F
SCSI Sys Adaptor, Centronic 50 Female to DB 25 Female
ADZ-C50F-D25M
SCSI Sys Adaptor, Centronic 50 Female to DB25 Male
ADZ-C50F-D50M
SCSI Centronic 50 Female to DB50 Male Adaptor
ADZ-HC50MC50F
SCSI Half Pitch Centronic 50 Male To Centronic 50 Female Adaptor
ADZ-HD50MC50F
SCSI Half Pitch D-SUB 50 Male To Centronic 50 Female Adaptor
ADZ-HC68MC50F
SCSI Half Pitch Centronic 68 Male To Centronic 50 Female Adaptor
ADZ-HD68MC50F
SCSI Half Pitch DB 68 Male to Centronic 50 Female Adaptor
ADZ-C50M-D25F
SCSI SYS Adaptor Centronic 50 Male to DB25 Female
ADZ-C50M-D25M
SCSI SYS Adaptor Centronic 50 Male to DB25 Male
ADZ-C50M-D50F
SCSI Centronic 50 Male to DB50 Female Adaptor
ADZ-HC50FC50M
SCSI Half Pitch Centronic 50 Female To Centronic 50 Male Adaptor
ADZ-HD50FC50M
SCSI Half Pitch DB 50 Female To Centronic 50 Male Adaptor
ADZ-HD50MC50M
SCSI Half Pitch DB 50 Male to Centronic 50 Male Adaptor
ADZ-HC14MD15F
SCSI Half Pitch Centronic 14 Male To DB15 Female Adaptor
ADZ-HC50MD25F
SCSI Half Pitch Centronic 50 Male To DB25 Female Adaptor
ADZ-HC14MD25F
SCSI Half Pitch Centronic 14 Male To DB25 Female Adaptor
ADZ-HC26MD25F
SCSI Half Pitch Centronic 26 Male To DB25 Female Adaptor
ADZ-HC36MD25F
SCSI Half Pitch Centronic 36 Male To DB25 Female Adaptor
ADZ-HD50FD25M
SCSI Half Pitch DB50 Female to DB25 Male Adaptor
ADZ-HC50MD50F
SCSI Half Pitch Centronic 50 Male To DB50 Female Adaptor
ADZ-HD50MD50F
SCSI Half Pitch DB50 Male To DB50 Female Adaptor
ADZ-HD50FD50M
SCSI Half Pitch DB50 Female To DB50 Male Adaptor
ADZ-HC50FF
SCSI Half Pitch Centronic 50 Female To Female Adaptor
ADZ-HC50MF
SCSI Half Pitch Centronic 50 Male To Female Adaptor
ADZ-HD50FHC50F
SCSI Half Pitch DB50 Female To Half Pitch Centronic 50 Female Adaptor
ADZ-HD50MHC50F
SCSI Half Pitch DB50 Male To Half Pitch Centronic 50 Female Adaptor
ADZ-HC50FHC68M
SCSI Half Pitch Centronic 68 Male To Half Pitch Centronic 50 Female Adaptor
ADZ-HD68MHC50F
SCSI Half Pitch DB68 Male to Half Pitch Centronic 50 Female Adaptor
ADZ-HD50FHC50M
SCSI Half Pitch DB50 Female To Half Pitch Centronic 50 Male Adaptor
ADZ-HD50MHC50M
SCSI Half Pitch DB50 Male To Half Pitch Centronic 50 Male Adaptor
ADZ-HD50FF
SCSI Half Pitch DB50 Female To Female Adaptor
ADZ-HD50MF
SCSI Half Pitch DB50 Male To Female Adaptor
ADZ-HD50FHC68M
SCSI Half Pitch DB50 Female To Half Pitch Centonic 68 Male Adaptor
ADZ-HD50FHD68M
SCSI Half Pitch DB68 Male To Half Pitch DB50 Female Adaptor

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

PAN PACIFIC SCSI CABLES 04/28/2003 at 6:34PM by Randy
SCSI CABLE SERIES

Part No.
Features
S-Z6850CMM
Available in 3' & 6' length
Centronics Adaptor Cable
Half Pitch D-SUB 68 Pin Male to Centronic 50 Pin Male
S-Z6850DMM
Available in 3' & 6' length
D-SUB Adaptor Cable
Half Pitch D-SUB 68 Pin Male to D-SUB 50 Pin Male
S-Z6850MM
Available in 3' & 6' length
SCSI 3 to 2 Cable
Half Pitch D-SUB 68 Pin Male to Half Pitch D-SUB 50 Pin Male
S-Z68MM
Available in 3' & 6' length
Device Cable
Half Pitch D-SUB 68 Pin, Male to Male
S-ZC2036MM
Available in 3' length
Printer Cable
Half Pitch Centronic 20 Pin Male to Centronic 36 Pin Male
S-Z50CMM
Available in 3' 6' & 10' length
Centronics Adaptor Cable
Half Pitch D-SUB 50 Pin Male to Centronic 50 Pin Male
S-Z50DMM
Available in 3' 6' & 10' length
D-SUB Adaptor Cable
Half Pitch D-SUB 50 Pin Male to D-SUB 50 Pin Male
S-Z50MM
Available in 3' 6' & 10' length
Device Cable
Half Pitch D-SUB 50 Pin, Male to Male
S-C50MF
Available in 3' 6' & 10' length
Extension Cable
SCSI Extension Cable Centronoc 50 Male to Female
S-C50MM
Available in 18" 3' 6' 10' length

Peripheral Cable
SCSI Peripheral Cable Centronic 50 Male to Male
S-50M25M
Available in 18" 3' 6' 10' length
System Cable
SCSI Cable DB25/M to Centronic 50 Male
S-C50DMM
Available in 3' 6' & 10' length
Adaptor Cable
SCSI Adaptor Cable, Centronic 50 Male to DB50 Male
S-IEEE1284BC
Available in 1, 2 & 3 meters
IEEE 1284 Bi-Directional Cable
Centronic 36 Pin Male to Half Pitch Centronic 36 Pin Cable
S-IEEE1284AC
Available in 1, 2 & 3 meters
IEEE 1284 Bi-Directional Cable
DB 25 Male to Half Pitch Centronic 36 Pin Male
S-IEEE1284AA
Available in 3' 6' 10' 15' 25' length
IEEE 1284 Bi-Directional Cable
DB 25 Male to Male Serial Cable
S-IEEE1284AB
Available in 3' 6' 10' 15' 25' length
IEEE 1284 Bi-Directional Cable
DB 25 Male to Centronic 36 Pin Male Printer Cable
S-IEEE-488-(X)
Available in 1, 2, 3, 5, 10 meters
GRIB IEEE 488 Cable
Double Shielded, Twisted Pair Low Noise Cable

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

PAN PACIFIC COMPUTER CABLES 04/28/2003 at 6:33PM by Randy
Computer Cables & Accessories

Part No.
Features
BRK-PS2-1
Bracket to PS2 Port 1X4 Connection
BRK-PS2-2
Bracket to PS2 Port 2X4 Connection
INT-44PWR
44 Pin 2.5" to 3.5" 40 Pin IDE + Power Cable
MMA-3.5MM-1'
MPEG Sound Card Connection Cord Male to Male, 1 ft.
MMA-3.5/RCA2-4'
Two RCA to 3.5 Plug Cords, 4ft.
MMA-RCAMF2-6"
RCA Male To Two Female Adaptor Cord 6"
MNI-SAUTO-12P-1284
One Computer with Two Printers, IEEE 1284 Bi-Tronic Auto Printer Switch
MNI-SAUTO-21P-1284
Two Computers with One Printer, IEEE 1284 Bi-Tronic Auto Printer Switch
MNI-SAUTO-41P-1284
Four Computers with One Printer, IEEE 1284 Bi-Tronic Auto Printer Switch
F-HD68F/M2
Wide SCSI HDD Extension Cable 20"
F-HD68M/2
Wide SCSI HDD Cable (Single Drive) 24"
F-HD68M/3
Wide SCSI HDD Cable (Duel Drive) 26"
F-HD68M/5
Wide SCSI HDD Cable (Quad Drive) 48"

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

PAN PACIFIC NEW PRODUCTS 04/28/2003 at 6:32PM by Randy
Part No.
Features
SMA-2518
SMA for RG58/U Flexible Cable Crimp Plug, Straight
SMA-2518N
SMA RG58U Flexible Cable Crimp Plug Straight Nickle Plate
SMA-2705
SMA For RG223/U Bulkhead Crimp Jack, Nickle Plate
SMB-2606
SMB for RG316/U 3 pcs. Crimp Plug
SMB-2616
SMB for RG316/U Standard Clamp Plug
SMC-2306
SMC for RG316/U 3 pcs. Crimp Plug
SMC-2901
SMC for RG316/U Flexible Cable Crimp Jack, Straight
SMC-2903
SMC for RG316/U Flexible Cable Bulkhead Crimp Jack, Straight
SMC-2963
SMC Rear Mount Bulkhead Jack, Solder Cup
SMC-2970
SMC PCB Mount Thru Hole Jack, 180 Degree
SMC-2979
SMC PCB Mount Thru Hole Jack, 90 Degree
I3E-488
IEEE 488 Connector Assembly
MCX-2201
MCX Straight Crimp Plug For RG316/U
MCX-2222
MCX Right Angle Crimp Plug For RG316/U
MCX-2251
MCX Straight Crimp Jack For RG316/U
MCX-2282
MCX Straight Jack For PC Board

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

METER TERMINOLOGY AND ABBREVIATIONS 04/28/2003 at 6:26PM by Randy
Common Terminology & Abbreviations for DMM Products

Alternating Current (AC, ac): An electrical current that periodically changes in magnitude and in direction of the current.

Alternation: Either half of a cycle of alternating current. It is the time period during which the current increases from zero to its maximum value (in either direction) and decreases to zero.

Alternator (or ac generator): An electromechanical device which transforms mechanical energy into electrical energy - an alternating current. Very early users called this a dynamo.

Ammeter: An instrument for measuring ac or dc electrical current in a circuit. Unless magnetically coupled, it must be placed in the current path so the flow is through the meter.

Ammeter Shunt: A low-resistance conductor that is used to increase the range of an ammeter. It is shunted (placed in parallel) across the ammeter movement and carries the majority of the current.

Ampere (A): The unit of measurement for electrical current in coulombs (6.25 x 1018 electrons) per second. One ampere results in a circuit that has one ohm resistance when one volt is applied to the circuit. See Ohm's law.

Amplifier: An electrical circuit designed to increase the current, voltage, or power of an applied signal.

Analog Multi-Meter: A piece of test equipment that can measure volts, ohms, amps, and other electrical characteristics and displays the reading by moving a needle over a fixed scale on a face plate.

Analog-to-Digital Conversion or Converter (ADC or A/D): The process of converting a sampled analog signal to a digital code that represents the amplitude of the original signal sample.

Audio and audio frequency (AF): The range of frequencies normally heard by the human ear. Typically, about 20 to 20,000 Hz.

Auto-ranging DMM: A digital display meter that after the function is manually selected automatically selects the proper range to display the input signal.

Beta (ß): The current gain of a transistor when connected in a common emitter circuit, now more commonly called hfe.

Bipolar: A semiconductor device having both majority and minority carriers.

Breakdown: The condition for a reverse biased semiconductor junction when its high resistance, under the reverse bias, suddenly decreases, causing excessive current. Not necessarily destructive.

Bridge Rectifier: A full-wave rectifier in which the rectifier diodes are connected in a bridge circuit to allow current to the load during both the positive and negative alternation of the supply voltage.

Capacitance (C): The capability to store charge in an electrostatic field. It can be expressed as equal to the charge Q in coulombs that is stored divided by the voltage E in volts that supplied the charge. Capacitance tends to oppose any change in voltage. The unit is farads.

Capacitive Reactance (XC): The opposition that a capacitor offers to a time changing signal or supplied voltage. Its value is
XC = 1/2pfC Capacitor (C): A device made up of two metallic plates separated by a dielectric or insulating material. Used to store electrical energy in the electrostatic field between the plates.

Cathode (K): The negative electrode of a semiconductor diode.

CE Mark: A symbol for European Conformity that indicates that the product was designed and manufactured to mandatory European Safety and EMC/EMI requirements. The Safety requirements cover both electrical and mechanical criteria. EMC is the ability to function properly in the presence electromagnetic signals. EMI makes sure that any electromagnetic emissions are below a level that will interfere with other electronic equipment.

Each of the Installation Categories has different voltage levels. 300, 600, and 1000 Volts are the most common levels of each Category. The higher the rating, the more demanding the testing criteria. Part of the design/testing is how well a product will tolerate transients and other faults external to the product. It also tests how well the case will protect the user in the instance that a fault should happen inside the product.

The CE rating of a product means that a product can safely be used to test voltage and current without harming the user in the instance that a fault should happen to the limits described below. This is brief description of each level, but is not an all inclusive description as applications will vary.
Installation Category I: Signal level applications; special equipment, parts of equipment, telecommunications, or other electronic equipment with measures taken to limit transient overvoltages to an appropriate low level.

Installation Category II: Local level, appliances, portable equipment, and other household or products with limited loads. Typically anything that could be plugged into power distribution wall sockets.

Installation Category III: Distribution level or fixed installation applications of permanent connection. This would cover from the service entrance into a building to the power distribution wall sockets.

Installation Category IV: Primary supply levels, outside overhead lines, power cable systems that lead to the service entrance of a building. Charge (Q): A measurable quantity of electrical energy representing the electrostatic forces between atomic particles. Electrons have a negative charge.

Choke: An inductance which is designed to pass large amounts of dc current. It usually is used in power supply filters to help reduce ripple; although, there are inductances called rf chokes (rfc) which prevent rf from feeding to a circuit.

Circuit: A complete path that allows electrical current from one terminal of a voltage source to the other terminal.

Circuit Breaker: An electromagnetic switch used as a protective device. It breaks a circuit if the current exceeds a specified value.

Clock Rate: The frequency of oscillation of the master clock, or oscillator, in a system.

Coil: The component that is formed when several turns of wire are wound on a cylindrical form or on a metal core.

Collector (C): The element in a transistor that collects the moving electrons or holes, and from which the output usually is obtained. Analagous to the plate of a triode vacuum tube.

Color Code: A system in which colors are used to identify the value of electronic components, or other variables, such as component tolerance.

Complementary Metal Oxide Semiconductor (CMOS): A logic signal that operate from a negative voltage to a positive voltage or at points between the maximum positive and negative voltages. The maximum voltage levels are determined by the manufacturer.

Component: The individual parts that make up a circuit, a function, a subsystem or a total piece of equipment.

Conductor: A substance through which electrons flow with relative ease.

Contactor: A special relay for switching heavy currents at power line voltages.

Continuity: A continuous electrical path.

Controlled Rectifier: A four-layer semiconductor device in which conduction is triggered ON by gate current and OFF by reducing the anode voltage below a critical value.

Coulomb (C): The unit of electrical charge, made up of a quantity of 6.25 x 1018 electrons.

Crest Factor: The ratio of the Peak value to the RMS value of the waveform.

Current (I): The flow of electrons, measured in amperes. One ampere results when one volt is impressed on a circuit that has a resistance of one ohm.

Data Hold: Holds the displayed reading when button is pressed. The display reading will be released when the HOLD button is pushed again.

Decibel (db): The standard unit for expressing the ratio between powers P1 and P2. dB = 10 log10 P1 / P2, one tenth of a bel.

Dielectric: The non-conducting material used to separate the plates of a capacitor or for insulating electric contacts.

Digital Multi-Meter: A piece of test equipment that can measure volts, ohms, amps, and other electrical characteristics and displays the reading on an LCD or LED's.

Digital Signal: A signal whose level has only discrete values, like on or off, 1 or 0, +5v or +0.2v.

Digital to Analog Conversion (or Converter) (DAC or D/A): A circuit that accepts digital input signals and converts them to an analog output signal.

Diode: A device which has two terminals and has a high resistance to current in one direction and a low resistance to current in the other direction.

Direct Current (DC, dc): Current in a circuit in one direction only.

Drain: The element in field-effect transistor which is roughly analagous to the collector of a bipolar transistor.

Effective Value: The value of ac current that will produce the same heating effect in a load resistor as the corresponding value of dc current.

Electricity: A form of energy produced by the flow of electrons through materials and devices under the influence of an electromotive force produced electrostatically, mechanically, chemically or thermally.

Electrolytic Capacitor: A capacitor whose electrodes are immersed in a wet electrolyte or dry paste.

Electromotive Force (E): The force which causes an electrical current in a circuit when there is a difference in potential. Synonym for voltage.

Electron: The basic atomic particle having a negative charge that rotates around a positively charged nucleus of an atom.

Electrostatic Field: The electrical field or force surrounding objects that have an electrical charge.

Emitter (E): The semiconductor material in a transistor that emits carriers into the base region when the emitter-base junction is forward biased.

Error: Any deviation of a computed, measured, or observed value from the correct value.

Farad (F): The basic unit for capacitance. A capacitor has a value of one farad when it has stored one coulomb of charge with one volt across it.

Field Coil: An electromagnet formed from a coil of insulated wire wound around a soft iron core. Commonly used in motors and generators.

Field-Effect Transistor (FET): A 3-terminal semiconductor device where current is from source to drain due to a conducting channel formed by a voltage field between the gate and the source.

Filament: The heated element in an incandescent lamp of vacuum tube.

Filter: A circuit element or group of components which passes signals of certain frequencies while blocking signals of other frequencies.

Fluorescent: The ability to emit light when struck by electrons or other radiation.

Forward Resistance: The resistance of a forward-biased junction when there is current through the semiconductor p-n junction.

Forward Voltage (or bias): A voltage applied across a semiconductor junction in order to permit forward current through the junction and the device.

Frequency (F or f): The number of complete cycles of a periodic waveform during one second.

Gain (G): 1. Any increase in the current, voltage, or power level of a signal. 2. The ratio of ouput to input signal level of an amplifier.

Ground (or Grounded): 1. The common return path for electric current in electronic equipment. Called electrical ground. 2. A reference point connected to or assumed to be at zero potential with respect to the earth.

Henry (H): The unit of inductance. The inductance of a coil of wire in henries is a function of the coils size, the number of turns of wire and the type core material.

Hertz (Hz): Once cycle per second.

Impedance (Z): In a circuit, the opposition that circuit elements present alternating current. The impedance includes both resistance and reactance.

Inductance (L): The capability of a coil to store energy in a magnetic field surrounding it which results in a property that tends to oppose any change in the existing current in the coil.

Inductive Reactance (XL): The opposition that an inductance offers when there is an ac or pulsating dc in a circuit. XL = 2pfL

Input Impedance: The impedance seen by a source when a device or circuit is connected across the source.

Junction: The region separating two layers in a semiconductor material, e.g. a p-n junction.

Junction Transistor: A PNP or NPN transistor formed from three alternate regions of p and n type material. The alternate materials are formed by diffusion or ion implantation.

Leakage (or Leakage Current): The undesired flow of electricity around or through a device or circuit.

Load: Any component, circuit, subsystem or system that consumes power delivered to it by a source of power.

Logic High/Low: Checks the logic level of TTL or CMOS LOGIC signals. Connect black test lead / COM input to the common bus of the logic circuitry. Connect red test lead / V-W input to the point to be tested. A logic '1' level (high pulse), is indicated by the (up arrow) symbol in the display and a logic' 0' level (low pulse) by the (down arrow) symbol and a 40ms beep tone.

Loop: A closed path around which there is a current or signal.

Manual ranging DMM: A digital display meter that after the function is manually selected the proper range must be selected to display the input signal.

Megohm (MΩ): A million ohms. Sometimes abbreviated meg.

Microampere (mA): One millionth of an ampere.

Microfarad (mfd, MFD, or mfd): One millionth of a farad.

Milliampere (mA): One thousandth of an ampere.

Millihenry (mH): One thousandth of an henry.

Milliwatt (mW): One thousandth of a watt.

Min/Max: Records the minimum and maximum values of the input signals, while displaying the current value. The meter beeps each time a new MIN or MAX value is recorded.

NPN Transistor: A bipolar transistor with a p-type base sandwiched between an n-type emitter, and an n-type collector.

N-type Semiconductor Material (N): A semiconductor material in which the majority carriers are electrons, and there is an excess of electrons over holes.

Ohm (Ω): The unit of electrical resistance. A circuit component has a resistance of one ohm when one volt applied to the component produces a current of one ampere.

Ohms-Per-Volt: The sensitivity rating for an analog voltmeter. Also expresses the impedance (resistance) presented to a circuit by the meter when a voltage measurement is made.

Ohm's Law:


Open Circuit: An incomplete path for current.

Oscillation: A sustained condition of continuous operation where the circuit outputs a constant signal at a frequency determined by circuit constants and as a result of positive or regenerative feedback.

Peak: The maximum positive or negative value of a sine wave.

Peak Hold: Holds the "Peak" value of the signal present in the display register. The display can be updated (higher only) at "Peak" value as long as leads are connected but will hold the "Peak" reading when leads are removed.

Peak to Peak: The value of a signal from the maximum positive point to the maximum negative point.

Pi (p): The mathematical constant which is equal to the ratio of the circumference of a circle to its diameter. Approximately 3.14.

Picofarad (pf): A unit of capacitance that is 1 x 10-12 farads or one millionth of a millionth of a farad.

Piezoelectric: A crystal property which causes a voltage to be developed across the crystal when mechanical stress is applied, or vice-versa.

PNP Transistor: A bipolar transistor with an n-type base sandwiched between a p-type emitter and a p-type collector.

Polarity: The description of whether a voltage is positive or negative with respect to some reference point.

Potential Difference: The voltage difference between two points, calculated algebraically.

Power (P): The time rate of doing work.

Power (Reactive): The product of the voltage and current in a reactive circuit measured in volt-amperes (apparent power).

Power (Real): The power dissipated in the purely resistive components of a circuit measured in watts.

Power Supply: A defined unit that is the source of electrical power for a device, circuit, subsystem or system.

Probe Hold: Holds & updates the displayed reading (both higher or lower) as long as test leads are connected, but will hold the display reading when test leads are removed. Select Probe Hold before taking a measurement. The meter beeps to indicate that a stable measurement has been recorded.

P-type Semiconductor Material (P): A semiconductor material in which holes are the majority carriers and there is a deficiency of electrons.

Range Lock Locks the display in the currently displayed range . Each subsequent push of the button moves to a higher range. From highest range the meter returns to the lowest range. If the measurement is greater than the selected range can display, an 'Overload' indication will be displayed.

Reactance (X): The opposition that a pure inductance or a pure capacitance provides to current in an ac circuit.

Rectification: The process of converting alternating current into pulsating direct current.

Relative Mode: The measurement is stored as a reference value and the display is reset to zero. The reference value is now deducted from subsequent measurements and only the difference is displayed. Take a measurement first and then activate Relative Mode, while the measurement is displayed.

Relay: A device in which a set of contacts is opened or closed by a mechanical force supplied by turning on current in an electromagnet. The contacts are isolated from the electromagnet.

Resistance (R): A characteristic of a material that opposes the flow of electrons. It results in loss of energy in a circuit dissipated as heat.

Resistor: A circuit component that provides resistance to current in the circuit.

Reverse Current: The current when a semiconductor junction is reverse biased.

Root-Mean-Square (RMS): See effective value. The RMS value of an ac sinusoidal waveform is 0.707 of the peak amplitude of the sine wave.

Semiconductor: One of the materials falling between metals as good conductors and insulators as poor conductors in the periodic chart of the elements.

Shunt: A parallel circuit branch, see Ammeter shunt.

Signal: In electronics, the information contained in electrical quantities of voltage or current that forms the input, timing, or output of a device, circuit, or system.

Silicon Controlled Rectifier (SCR): A semiconductor diode in which current through a third element, called the gate, controls turn-on, and the anode-to-cathode voltage controls turn-off.

Sine (sinusoidal) Wave: A waveform whose amplitude at any time through a rotation of an angle from 0° to 360° is a function of the sine of an angle.

Step-Down Transformer: A transformer in which the secondary winding has fewer turns than the primary.

Step-Up Transformer: A transformer in which the secondary winding has more turns than the primary.

Transformer: A set of coils wound on an iron core in which a magnetic field couples energy between two or more coils or windings.

Transistor: A three-terminal semiconductor device used in circuits to amplify electrical signals or to perform as a switch to provide digital functions.

Transistor Transistor Logic (TTL): A logic signal that operates between 0 and +5 volt limits.

True RMS: The True Root Mean Square value of a waveform = square root of the AC RMS component squared plus DC component squared. This method of measurement should be used for signals that are not sinusoidal and centered at zero. Most TRMS meters have a Crest Factor limit of about 5:1 for accurate measurements.

Turns Ratio: The ratio of secondary winding turns to primary winding turns of a transformer.

Vector: A line representing the magnitude and time phase of some quantity, plotted on rectangular or polar coordinates.

Voltage (or Volt): The unit of electromotive force that causes current when included in a closed circuit. One volt causes a current of one ampere through a resistance of one ohm.

Voltage Drop: The difference in potential between two points caused by a current through an impedance or resistance.

Watt (W): The unit of electrical power in joules per second, equal to the voltage drop (in volts) times the current (in amperes) in a resistive circuit.


To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN PRODUCTS 04/28/2003 at 6:22PM by Randy
Test Tools - Product Specifications

Wavetek Meterman's Data Sheets, Detailed Specifications, Application Notes, White Papers, and Technical Manuals AVAILABLE,
contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

Hand Held DMMs (Brochures, Specifications)

XR Series DMMs New! 30XR 33XR 34XR 37XR 38XR

Pen DMMs
3ľ Digit Display Pen-Type DMMs DM73B

Pocket-Size, Basic DMMs & Ammeters
Analog VOM and Pocket DMMs with Battery Testers AM8 DM7 DM9

3˝ and 3ľ Digit Analog + Digital Display, Pocket Size DMMs DM2 DM78A

Compact, Multi-Function XL Series:
3˝ Digit, Large Character Display, Low Cost DMMs 5 XL 10 XL 15 XL 16 XL

3ľ Digit, Analog + Digital Display, Autorange DMM 35XL

Compact, Multi-Function XT Series
Digital Multimeters 23 XT 25 XT 27 XT 28 XT

4˝ Digit Display, Highest Accuracy, True RMS DMM 85XT

Multi-Function T-Meter Series
Wavetek Meterman's New T-Shaped DMMs with Digi-Glo Backlight RMS225A 220 235

Heavy Duty High Performance HD Series New!
Specifications HD110B HD115B HD160B

3˝ and 4˝ Digit Display, Industry Standard for Heavy-Duty DMMs HD110 HD110T

High Accuracy & performance 2015
Autoranging Digital Multimeter Wavetek Meterman 2015


Electrical Testers

Voltage Testers VT101 & VT102

Socket Testers ST101 & ST102

Non-Contact Voltage Detector VT201


Clamp-on Meters

Clamp-On Meters for Electrical Testing
AC Mini-Clamp Ammeter AD40A

True-RMS Ammeter AD105

AC DMM AC38 AC60 AC65

mini-clamp DMM AC40A

Multi-Functional DMM AC68


Bench Instruments (DMMs, Function Generators, Counters)

Benchtop Multimeters
3ľ Digit Display, Analog/Digital, LCD Display BDM35

4˝ Digit Display, True RMS, Benchtop DMM BDM40

Benchtop Function Generators
3MHz, Pulse Output, DC Offset, Duty-Cycle Control FG2C

3MHz, Linear or Log Sweep, AM, FM, VCF, LED Display FG3C



Temperature and Light

TM45 Meters - Thermometer IR610 - Infrared Thermometer New! LM631 - Digital Light Meter New!




Component, Continuity Testers

CR50 - Capacitance and Resistance Meter LCR55 Meter SF 10 Short Finder Brush


DMM Accessories

Current Clamps,Radio Frequency Probe,High Voltage Probes
Radio Frequency Probe S/B RF241

High Voltage Probes HV-231-10
AC Current Clamp S/B CT231A CT232A - Amp Clamp

AC/DC Current Probes CT235 CT237 CT238

Accessories Cross Reference Guide (18.7 KB) TC253A - Voltage/Temperature Converter (87,615) LP10A, LP25A - Logic Probes (100,231)

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN TEST ACCESSORIES 04/28/2003 at 6:15PM by Randy
Test Leads and Accessories

Wavetek Meterman offers a complete selection of accessories to protect your tools and keep them operating. From standard replacements to deluxe kits, there are test leads which fit Wavetek Meterman and most other brands of DMMs. An array of attractive and functional carrying cases and rubber holsters protect your DMM as well as keep test leads and meters together.

Carrying Cases
Special Probes
Protective Holsters
Test Leads
Test Lead Kits
Fuses
Accessory Compatibility Chart

DC205B

* Leather grained, heavy duty case
* Impact resistant for tough environments
* Allows use of meter while still in case

DC207B
* Leather grained, heavy duty case
* Impact resistant for tough environments
* Allows use of meter while still in case
* Extra compartment to store current clamp

VC11

* Padded vinyl carrying case
* Velcro closure
* Designed for DM73B and leads

VC12

* Padded vinyl carrying case
* Velcro closure
* See Accessory Chart for Meters

VC30
* Padded vinyl carrying case
* Velcro closure
* See Accessory Chart for Meters

VC221A
* Padded vinyl carrying case
* Velcro closure
* See Accessory Chart for Meters

HV231-10
* High voltage probe
* Extended voltage measuring to 40kV
* Use with standard multimeters with 10Mohm input impedance

Note: HV probe for 22 MW input is available, HV231-22

RF2441
* Radio frequency probe
* Measures 100kHz to 650MHz
* 50 volt RMS maximum input
* Includes mini-gripper and insulation piercing tips

H10Y

* Protective rubber holster
* Includes tilt stand

H30Y

* Protective rubber holster
* Accomodates tilt stand on meter

RTL20

* 40" PVC insulated lead wires with insulated probe tips
* Shrouded 90° banana plugs
* One red and one black

RTL25

* 30" PVC insulated lead wires with insulated probe tips
* Non-shrouded 90° banana plugs
* One red and one black

TL244

* 48" heavy duty test lead wire with Ever-sharp probe tips that accept screw-on alligator clips (AL244)
* Shrouded 90° banana plugs
* One red and one black

AL244

* Screw-on alligator clips
* For use with TL244
* One red and one black

TL245


* 36" PVC insulated lead wires
* Shrouded 90° banana plugs
* One red and one black

TL246B

* 48" silicone insulated lead wires with 0.5" jaw, heavy duty alligator clips
* Shrouded 90° banana plugs
* One red and one black

TL35A

* 40" PVC insulated lead wires with probe tips threaded to accept the detachable, included alligator clips
* CE approved alligator clips, 0.6" jaw
* Shrouded 90° banana plugs
* One red and one black leads and clips

TL36

* 40" PVC insulated lead wires with probe tips threaded to accept the detachable, included alligator clips
* CE approved alligator clips, 0.4" jaw
* Shrouded 90° banana plugs
* One red and one black leads and clips

TL73B

* Replacement black lead for DM73B
* 40" PVC insulated wire with probe tip threaded to accept the detachable alligator clip
* CE approved alligator clip, 0.4" jaw
* Shrouded 90° banana plug

TP73B

* Replacement probe tip for DM73B meter
* 0.5" probe tip length

Back to the Top

DL243C

* Test Lead Kit
* Silicone lead wires, 48" long, red and black
* Standard probe tips, red and black
* Alligator clips, red and black
* Spade lugs, red and black
* Carry case with pockets and velcro closure
* EN61010-2-031 CE Safety Approved

DL248C

* Deluxe Test Lead Kit
* Silicone lead wires, 48" long, red and black
* Standard probe tips, red and black
* Alligator clips, red and black
* Spade lugs, red and black
* Spring loaded crimp tips, red and black
* Red tip length extender
* Carry case with pockets and velcro closure
* EN61010-2-031 CE Safety Approved

Back to the Top

Meter Model # Fuse Requirements
2015 P/N 1561589: 500mA 250V.
P/N 1561646: 20A 600V
RMS225A P/N 1561610: 250mA 500V
P/N 1565777: 15A 600V
220, 235 P/N 1561622: 500mA 500V,
P/N 1565777: 15A 600V
85XT P/N 1561577 500mA 250V,
P/N 1561589 500mA 250V,
P/N 1561646 20A 600V
320B/HD110/ HD110T/HD110B P/N 1561592 2A 600V,
P/N 1565777 15A 600V
HB115B P/N 1561550 100mA 250V (Cap),
P/N 1561592 2A 600V,
P/N 1565777 15A 600V
HD160B P/N 1561610: 250mA 500V,
P/N 1561646 20A 600V
DM2/5XL/DM9 P/N 1561577 500mA 250V
10XL/15XL/23XT P/N 1561577 500mA 250V,
P/N 1561646 20A 600V
16XL/35XL P/N 1561550 (cap), 100mA 250V,
P/N 1561577 500mA 250V,
P/N 1561646 20A 600V
CR50/LCR55 P/N 1561550 (cap) 100mA 250V
AM8/DM7 P/N 1561561 200mA 250V
25XT P/N 1561550 100mA 250V,
P/N 1561631 10A 600V
27XT P/N 1561577 500A 250V,
P/N 1561646 20A 600V
28XT P/N 1561550 100mA 250V,
P/N 1561646 20A 600V

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN COMPONENT / CONTINUNITY TESTERS 04/28/2003 at 6:12PM by Randy
Component / Continuity Testers

CR50

Sort, match, QC inspect, and verify components, check circuits with this full range capacitance and resistance meter

* Dual zero adjustment pots to null strays and test leads
* Special “Low Ohms” range
* Oversized, read-at-a-glance display
* Premium test leads with alligator clips

LCR55

The ultimate component checker measures inductance,capacitance, resistance, transistors, diodes and microwave diodes

* Plug-in test slots and test leads
* Oversized, read-at-a-glance display
* Data hold and max hold
* Auto-off
SF10

* Quickly check for the presence of ac voltages, with no electrical contact
* Safe non-contact detection of voltages from 70 V to 440 V ac
* Both visible and audible indicators
* Detector emits loud audible chirping that changes pitch based on probes proximity to the ac voltage source
* Bright flashing LED also indicates presence of ac voltage
* Batteries included

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN INFARED THERMOMETER MODEL IR610 04/28/2003 at 6:10PM by Randy
Meterman IR610 Infrared Thermometer

The Meterman IR610 is a portable, easy-to-use, compact-sized, digital infrared thermometer for measuring temperature in °C and °F. The IR610 utilizes non-contact technology for measuring surface temperatures from a distance. The IR610 brings the high technology of infrared temperature measurement into a value-priced thermometer.

Features

* Laser pointer for accurate targeting
* Measures to 500°F (260°C), front panel switchable
* Narrow 10:1 field of view measures 1" at 10" distance
* Fixed emissivity at 0.95
* Certified to meet CE EN60825 Class II for Laser safety
* Data hold, low battery indicator, Auto Power Off
* Large 3-1/2 digit display with backlight feature
* Case is rugged valox plastic in ergonomic design for holding ease
* Battery hatch cover to easily replace batteries
* Shipped with carrying case, four AAA batteries installed and operator's guide

Application

For maintenance personnel who need to make temperature measurements in hard to reach places, or of objects that are rotating, electrically charged, or too hot to touch, or substances that must not be contaminated by touch. Also, when a temperature measurement is needed quickly from a surface, no matter the location.
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN LIGHT METER LM631 04/28/2003 at 6:09PM by Randy
Meterman LM631 Digital Light Meter

The Meterman LM631 is a portable, easy-to-use, compact sized digital light meter designed for simple, one hand operation with the measurement reading in lux or fc units. This value-priced unit offers high resolution readings and adherence to published standards for human eye response to illuminance.

Features

* Measures wide range of light up to 20,000 fc or lux, front panel switchable Accurate, high resolution of 0.01 fc/lux
* Sensor dome has 45" attached cord for measurement flexibility
* Built-in CIE spectrum curve for accurate human eye response
* Peak hold and data hold
* Large 3-1/2 digit display with backlight feature
* Meets CE EN61326-1 certification for safety ratings
* Analog output for monitoring and charting
* Case is rugged valox plastic in ergonomic design for holding ease
* Battery hatch cover to easily replace batteries
* Shipped with carrying case, extra lens cover, 4 AAA batteries installed and manual

Application

For Facility Engineers or Building Maintenance personnel who need to ensure indoor light and work area lighting requirements, comply with safety regulations, or monitor building and security light levels. Anyone who wants to measure illumination levels.
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN VOLTAGE TESTERS 04/28/2003 at 6:08PM by Randy
Electrical Testers

Voltage Tester , Model VT102

* 4 Bright neon lights indicate ac voltage
* 4 Ranges indicated from 110 V to 460 V ac
* No battery needed
* Tests 2 wire and 3 wire ac outlets

Voltage Tester , Model VT101

* Bright neon light indicates ac voltage
* Identify ac Voltage from 90-500 V ac
* No battery needed
* Tests 2 wire and 3 wire ac outlets

Non-Contact Voltage Detector , Model VT201

* Quickly check for the presence of ac voltages, with no electrical contact
* Safe non-contact detection of voltages from 70 V to 440 V ac
* Both visible and audible indicators
* Detector emits loud audible chirping that changes pitch based on probes proximity to the ac voltage source
* Bright flashing LED also indicates presence of ac voltage
* Batteries included

GFCI Socket Tester , ST102

* Test GFCI breakers for proper wiring and operation
* Easy to read light indicators show common wiring problems
* Confirm GFCI socket is wired for protection
* GFCI circuit trips to confirm tester is working
* For use on 110-125 V ac

View Data Sheet
Socket Tester , Model ST101

* Fast, easy socket test
* Easy to read light indicators
* Confirm proper wiring and operation of ac socket
* GFCI circuit trips to confirm tester is working
* For use on 110-125 V ac

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN CLAMPON METERS 04/28/2003 at 6:07PM by Randy
Clamp-On Series

Compact and Convenient Clamp-On Meters for all your Electrical Testing Needs

There’s no question the clamp-on style meter continues to be the preferred meter of choice for testing, measuring and troubleshooting typical electrical installations.

Look for the distinctive red color scheme of Wavetek Meterman’s clamp-on meters — the only choice for electrical professionals who demand value, durability and high quality from their test tools.

Tech-Preferred™ Features

Wavetek Meterman offers a complete line of clamp-on instruments specifically tailored to provide reliable, non-invasive testing for various current, voltage and resistance ranges and includes Tech-Preferred™ features such as Data Hold and Auto Power Off.

Tech-Preferred™ Features
All Wavetek Meterman clamp-on meters are distinguished with many time-saving, Tech-Preferred advantages that give you increased utility and greater performance in every application.

* Data Hold
* Auto Power Off
* Autoranging


Clamp Ammeter

AD40A
AC Mini-Clamp Ammeter

* 400A AC range
* 4000-count
* Autoranging
* Data hold
* Auto power off
* CE approved
AD105
True-RMS Ammeter

* 1000A AC range
* True-RMS
* AAC, ADC, frequency
* 4000-count
* Autoranging
* Peak hold

Clamp Multimeter

AC38
AC DMM

* 400A AC range
* VAC, AAC, continuity
* 2000-count
* Autoranging
* Data hold
*
*

AC40A
Mini-Clamp DMM

* 400A AC range
* VAC, AAC, ohms, continuity
* 4000-count
* Autoranging
* Data hold
* Auto power off
* CE approved

AC60/AC65
AC DMM

* 600A AC range
* VAC, AAC, ohms, continuity
* 4000-count
* Autoranging
* Data hold

AC68
Multi-Functional DMM

* 600A AC range
* VAC, AAC, VDC, VAC, Frequency, Diode Test,ohms, continuity
* 4000-count
* 11 manual ranges
* Data and AC peak hold
* AC65=True RMS Measuring


Accessories Compatibility


Clamp Meter Specifications
(Specifications subject to change without notice.)
AD40A AD105 AC40A AC38 AC60 AC65 AC68
Display/Resolution 4000 4000 4000 2000 4000 4000 4000
Autoranging Yes Yes Yes Yes Yes Yes
True-RMS Measuring Yes Yes
AC Current 400A 1000A 400A 400A 600A 600A 600A
DC Current 1000A 600A
AC Voltage 600V 750V 600V 600V 600V
DC Voltage 600V 600V
Basic Accuracy 1.9% 1.9% 1% 1.2% 1.2% 1.2% 0.75%
Resistance 400 40k 40k 4k
Frequency 10kHz 20kHz
Diode Test Yes
Continuity Test Yes Yes Yes Yes Yes
Data Hold Yes Yes Yes Yes Yes Yes
Auto-Off Yes Yes Yes Yes Yes Yes Yes
DC Auto Zero Yes Yes
AC Peak Hold Yes Yes
Max. Conductor Size 25.4mm
(1") 51mm
(2") 25.4mm
(1") 25mm
(1") 40mm
(1.57") 40mm
(1.57") 40mm
(1.57")

CT Series Current Clamps

A comprehensive line of transformers/probes for AC or AC/DC current measuring adds to the list of Wavetek Meterman products for electrical measurement applications. Use these "CTs" as an accessory front-end to standard DMMs, recorders, digital or analog meters, data loggers/DAS, O'Scopes, or other test and measurement instruments to increase current measuring capability. These probes convert high current to a low level millivolt or milliamp signal for input directly to test instruments.

AC
Model CT231A CT232A CT234A CT236
Output mA mA mV mV
Current Range 1-200A 1-1000A 4-400A 4-500A
Frequency Range 40 Hz-1kHz 30 Hz-10kHz 48 Hz-1kHz 48 Hz-1kHz
Max. Conductor Size 20mm (0.78") 52mm (2.00") 30mm (1.18") 30mm (1.18")

AC / DC
Model CT235 CT237 CT238
Output mA mA mV
Current Range 2-2000A 500mA-200A 10mA-20A
Frequency Range DC to 10kHz DC to 10kHz DC to 20kHz
Max. Conductor Size 31mm (1.2") 19mm (0.75") 19mm (0.75")

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN BENCH EQUIPMENT 04/28/2003 at 6:05PM by Randy
Bench Test Equipment

When your applications are best suited to bench-top style meters

look to Wavetek Meterman for solutions. For depot service benches, design engineer's benches, production or QC benches, school labs and more, Wavetek Meterman offers three different low cost/high feature test instruments. Select from DMM and Function Generators. All are housed in an attractive custom case with a cushion grip, non-skid, tilt-stand handle, rear power cord wrap, and grooved channels to allow stacking.

FG2C Function Generator

* 3MHz function generator
* High feature, low cost
* Easy push-button selection for power, range and waveform
* Square, triangle, sine wave and TTL/CMOS outputs
* Duty cycle and DC offset control VCF input
* Includes test cables and spare fuses Range: 0.3 Hz to 3 MHz, ± 5 % of full-scale Main Output: >20 Vp-p open circuit, >10 Vp-p into 50 W load DC Offset Control: -10 V to +10 V(open)/-5 V to +5 V (50 W load) Duty Cycle: 80 % : 20 % : 80 % Cont. Variable VCF Input: (0 V to ±10 V) ±1 V input for 100:1 ratio Input Impedance: 10 kW ±10 %

Note: Also available in 220 V version as FG2CE

FG3C Sweep/Function Generator

* 3 MHz sweep/function generator
* Built-in, 6 digit display 150 MHz frequency counter
* Best value combination generator
* Square, triangle, sine wave and TTL/CMOS outputs
* Amplitude or frequency modulation
* Linear and logarithmic sweep modes
* Duty cycle, VCF and DC offset control
* Includes test cables and spare fuses Range: 0.3 Hz to 3 MHz, ± 5 % of full-scale Main Output: 0.3 Hz-3.0 MHz, >20 Vp-p open circuit, >10 Vp-p into a 50 W load DC Offset Control: -10 V to +10 V(open)/-5 V to +5 V (50 W load) Duty Cycle: 1:1 to 10:1 continuously variable VCF Input: (0 V to ±10 V) ±1 V input for 100:1 ratio Input Impedance: 10 kW, ± 5 %

Note: Also available in 220 V version as FG3CE

BDM40 True-rms

* True-rms, 4-1/2 digit, 20,000 count benchtop DMM
* AC or AC+DC input coupling
* High accuracy, basic VDC 0.03 %
* Easy-to-read 0.5” LED display
* Interlocking push-button control for easy selection CAT III 1000 V Rated

Note: Also available in 220 V version as BDM40E

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

38XR WAVETEK METERMAN METER 04/28/2003 at 6:02PM by Randy
38XR True RMS digital multimeter with optical PC interface



For Engineers designing and troubleshooting industrial automation and control systems, the 38XR delivers the highest safety rating available – CAT IV 600 V and CAT III 1000 V. The features include temperature, capacitance, frequency, 4-20mA loop current percentage, backlight and PC interface. With the addition of 38SW software and RS232 cable, the 38XR can be used for real-time data acquisition using any industry standard Windows® PC.

* 10,000-count with high 0.25 % accuracy
* Bright blue backlight for dim environments
* Duty cycle, capacitance and frequency
* Magne-Grip™ holster with magnetic hanging strap frees both hands for work
* 4-20 mA loop current with % readout
* Temperature to 2372 °F/1300 °C type K thermocouple included
* True rms AC + DC coupled for accurate ripple measurements
* Includes heavy-duty test leads, threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

Magne-Grip™ Holster with magnetic hanging strap

Many DMM users find they need a “third hand” when taking a measurement with their meter. We designed the Magne-Grip™ holster to protect the meter and provide the “third hand” DMM users need. An innovative magnetic hanging strap secures the meter to a convenient steel surface, freeing both hands for work.



Optional RS232 cable and software, 38-SW

Software image

* Real-time data acquisition software logs and displays data from all 38XR measurement functions
* Stores data for retrieval or for further analysis
* Exports data for use in Excel® or other programs
* Supports Windows® 98, NT, XP and their variants

General Specifications
Voltage AC
1000 V
Voltage DC
750 TRMS AC + DC
mV AC
TRMS AC + DC
Basic DC Accuracy
0.25%
DC Current, fused
10 A
AC Current, fused
10 A TRMS
Resistance
40MΩ
Capacitance
400µF
Frequency
10 MHz
Temperature
2372 °F/1300 °C

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN 37XR METER 04/28/2003 at 6:02PM by Randy
37XR True RMS digital multimeter with component and logic test

For electronics, the 37XR is a high-resolution, true rms meter for troubleshooting electronic circuits at the bench or on the job site. The 37XR features capacitance, inductance, frequency, logic test, peak hold, dBm and backlight.

* Autoranging 10,000 count with 0.1% accuracy for the most accurate measurements
* LCR component test functions – inductance, capacitance and resistance
* Bright blue backlight for dim work environments
* CAT II 1000 V, CAT III 600 V and UL listed
* Magne-Grip™ holster with magnetic hanging strap frees both hands for work
* Min/Max, Avg, Rel and Data Hold
* Includes heavy-duty test leads with threaded alligator clips, manual, spare fuse and 9 V battery

Three-year warranty

Magne-Grip™ Holster with magnetic hanging strap

Many DMM users find they need a “third hand” when taking a measurement with their meter. We designed the Magne-Grip™ holster to protect the meter and provide the “third hand” DMM users need. An innovative magnetic hanging strap secures the meter to a convenient steel surface, freeing both hands for work.

General Specifications
Voltage AC
1000 V
Voltage DC
750 TRMS AC
mV AC
TRMS
Basic DC Accuracy
0.1%
DC Current, fused
10 A
AC Current, fused
10 A TRMS
Resistance
40MΩ
Capacitance
400µF
Frequency
10 MHz
Logic Test
TTL/CMOS 20MHz
Inductance
40 H

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN 34XR METER 04/28/2003 at 6:00PM by Randy
34XR True rms digital multimeter with temperature and backlight



For contractors and field service technicians, the 34XR provides a true rms, autoranging meter for trouble-shooting difficult problems. 34XR features temperature, capacitance and frequency.

* True RMS for the most accurate voltage measurements
* Extended 4000 µF capacitance range for motor start testing
* Bright blue backlight for dim work environments
* Duty cycle, frequency and capacitance for complete measurement capability
* Temperature with a type K thermocouple to 1832 °F/ 1000 °C
* Magne-Grip™ holster with magnetic hanging strap frees both hands for work
* Data hold, Min/Max and bar graph for capturing quick measurement events
* CAT II 1000 V, CAT III 600 V, UL listed and OSHA compliant
* Includes heavy-duty test leads, threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

Three-year warranty

Magne-Grip™ Holster with magnetic hanging strap

Many DMM users find they need a “third hand” when taking a measurement with their meter. We designed the Magne-Grip™ holster to protect the meter and provide the “third hand” DMM users need. An innovative magnetic hanging strap secures the meter to a convenient steel surface, freeing both hands for work.



General Specifications
Voltage AC
1000 V
Voltage DC
750 TRMS AC
mV AC
TRMS
Basic DC Accuracy
0.5%
DC Current, fused
10 A
AC Current, fused
10 A TRMS
Resistance
40MΩ
Capacitance
4000µF
Frequency
40 MHz
Temperature
1832°F/1000°C
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN 33XR METER 04/28/2003 at 5:59PM by Randy
33XR Manual ranging with temperature and capacitance

For field service technicians, the 33XR has the measurement functions needed for maintenance, repair and installation of electrical, HVAC and electro-mechanical equipment.

* Temperature, frequency and capacitance for complete measurement capability
* Extended 4000 µF capacitance range for motor start testing
* Magne-Grip™ holster with magnetic hanging strap frees both hands for work
* Data hold, Peak Hold, Min/Max and REL
* CAT II 1000 V, CAT III 600 V, UL listed and OSHA compliant
* Includes heavy duty test leads and threaded alligator clips, temperature adapter, type K thermocouple, manual, spare fuse and 9 V battery

One-year warranty

Magne-Grip™ Holster with magnetic hanging strap

Many DMM users find they need a “third hand” when taking a measurement with their meter. We designed the Magne-Grip™ holster to protect the meter and provide the “third hand” DMM users need. An innovative magnetic hanging strap secures the meter to a convenient steel surface, freeing both hands for work.



General Specifications
Voltage AC
1000 V
Voltage DC
750 V Avg.
mV AC
Average
Basic DC Accuracy
0.7%
DC Current, fused
10 A
AC Current, fused
10 A
Resistance
4MΩ
Capacitance
4000µF
Frequency
40 MHz
Temperature
1832°F/1000°C
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK XR30 DMM METER 04/28/2003 at 5:58PM by Randy
30XR Manual ranging digital multimeter with non-contact voltage tester



Basic functions for automotive, residential, and education applications. The 30XR is a manual ranging digital multimeter with non-contact voltage detector and battery test.

* Innovative, non-contact voltage detector safely indicates the presence of dangerous live voltage
* Magne-Grip™ holster with magnetic hanging strap frees both hands for work
* Safety rated at CAT II 600 V, CAT III 300 V, UL listed and OSHA compliant
* 9 ranges, 30 functions and handles most measurement needs
* Battery/fuse door designed for easy accessibility
* Includes heavy-duty test leads, manual, spare fuse and 9 V battery

One-year warranty

Magne-Grip™ Holster with magnetic hanging strap

Many DMM users find they need a “third hand” when taking a measurement with their meter. We designed the Magne-Grip™ holster to protect the meter and provide the “third hand” DMM users need. An innovative magnetic hanging strap secures the meter to a convenient steel surface, freeing both hands for work.



General Specifications
Voltage AC
600 V
Voltage DC
600 V Avg.
mV AC
Average
Basic DC Accuracy
1.0%
DC Current, fused
10 A
AC Current, fused
10 A
Resistance
20MΩ

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

NEW WAVETEK METERMAN METERS 04/28/2003 at 5:56PM by Randy
Introducing the New Meterman XR Series
Five meters designed for electronic, electrical, plant maintenance and HVAC applications

30XR Manual ranging with non-contact voltage tester
33XR Manual ranging with temperature and capacitance
34XR True RMS with temperature and backlight
37XR True RMS with component and logic test
38XR True RMS with optical PC interface

The XR Series is a completely new line of five digital multimeters newly designed from the ground up to help you make more accurate measurements in a shorter time. Each meter is designed with different customer needs and applications in mind and provides a different set of innovative features.

The Magne-Grip™ Holster comes with every XR Series meter. The Magne-Grip™ Holster uses a magnetic hanging strap to free both hands for work. Now you can conveniently hang your meter on any available steel surface, such as a breaker panel, a furnace housing, or a car body! The Magne-Grip™ holster can also be used to hang the XR meter above a electronics work bench or a production station, freeing up valuable work space.

Each XR meters is designed with safety of the user in mind. All XR Series meters are fully OSHA compliant, with IEC 1010 and UL Safety ratings. The highest quality full-size fuses, including sand-filled fuses on the current ranges, fully shrouded and recessed input jacks, and CAT III 1000V test leads are all included to enhance safety.

Finally, every XR Series meter is comes with a 1 year or 3 year Meterman's No-Hassle™ Warranty. If there is a failure or problem with the meter during the warranty period just return the meter to your distributor to receive a replacement unit with no waiting. No more sending your meter to a service department and waiting (and waiting) for it to be returned.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN NEW XR SERIES 04/28/2003 at 5:54PM by Randy
Discover Wavetek Meterman's new XR Series of digital multimeters

* Bright blue backlight
* 10,000-count resolution with high accuracy
* Magne-Grip™ Holster with magnetic hanging strap frees both hands for work
* Optical RS232 interface for real time logging
* Advanced measurement features including temperature, duty cycle, frequency, dBm and many more
* True RMS for the most accurate measurements
* The highest safety rating available CAT IV 600 V/ CAT III 1000 V

For more information on our complete line of five XR Series Meters
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN NEW XR SERIES 04/28/2003 at 5:53PM by Randy
Discover Wavetek Meterman's new XR Series of digital multimeters

* Bright blue backlight
* 10,000-count resolution with high accuracy
* Magne-Grip™ Holster with magnetic hanging strap frees both hands for work
* Optical RS232 interface for real time logging
* Advanced measurement features including temperature, duty cycle, frequency, dBm and many more
* True RMS for the most accurate measurements
* The highest safety rating available CAT IV 600 V/ CAT III 1000 V

For more information on our complete line of five XR Series Meters
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

WAVETEK METERMAN METERS 04/28/2003 at 5:51PM by Randy
Wavetek, a very well established brand of test tools will transition over time using the Wavetek Meterman name. This new brand combines the best of both worlds - the recognition and awareness of the Wavetek brand and the excitement and market opportunities of a new value-brand.

Family of products

Discover Wavetek Meterman's new XR Series of digital multimeters

* Bright blue backlight
* 10,000-count resolution with high accuracy
* Magne-Grip™ Holster with magnetic hanging strap frees both hands for work
* Optical RS232 interface for real time logging
* Advanced measurement features including temperature, duty cycle, frequency, dBm and many more
* True RMS for the most accurate measurements
* The highest safety rating available CAT IV 600 V/ CAT III 1000 V

For more information on our complete line of five XR Series Meters OR To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
[comments?][Karma: 3 ( + / - )][Link] to comments

April 2003
Sun Mon Tue Wed Thu Fri Sat
  1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
Mar
May



MyPHPblog


Validated HTML 4.01 Validated CSS