Distributors for FLUKE METERS CLAMPS AND ACCESSORIES

Industrial Electronics Distributor of Fluke 330 Series Clamp Meters Call: 414-327-1555

Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

Fluke 330 Series Clamp Meters

Introduction | Features | Specifications | Accessories and Ordering Information

Fluke 330 Series Introduction
Leading the way with innovative features that fit the way you work.

The Fluke 330 Series gives clamp meter a whole new meaning. Five new models offer an impressive array of innovative features with current ranges up to 1000 A. Choose the model that matches the jobs you do.

Auto shut-off maximizes battery life and makes sure the meter works when you need it. The slim, easy-to-grip body fits comfortably in your hand. The narrow jaws easily squeeze in and out of the tight spots. The large, backlit display makes measurements easy to see in any light. And if you need to troubleshoot current surges that can trip motor starters, choose a model with the inrush current function.

Fluke 330 Series

Back to top of page

Fluke 330 Series Feature at glance
  • Auto shut-off maximizes battery life so the meter works when you need it
  • Small body and jaws fit perfectly in your hand and into tight places
  • Large, backlit display (on most models) is easy to see
  • Inrush current function (on most models) for measuring starting current for motors, lighting, etc.
  • Improved low current measurement accuracy from new microprocessor technology
  • Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch)
  • Handy display hold keeps measurements on the display
  • Backed by Fluke technical phone support, repair, parts and calibration service
  • Three-year warranty
Fluke 330 Series

Back to top of page

Fluke 330 Series Technical Specifications
AC Current
Range
333:0-400.0 A
334,335,336:0-600.0 A
337:0-999.9 A
Accuracy
333,334,335:2% 5 counts (50/60 Hz)
336,337:2% 5 counts (10-100 Hz)
6% 5 counts(100-400 Hz)
Crest Factor
333,334:Not Applicable
335:2.4@500 A, 2.0@600 A add 2% for C.F.>2
336:3@500 A, 2.5@600 A add 2% for C.F.>2
337:3@500 A 2.5@600 A 1.42@1000 A add 2% for C.F.>2
AC Response
333,334:Averaging
335,336,337:True-rms
In-Rush
Integration Time
333:Not Applicable
334,335,336,337:100 ms
DC Current
Range
333,334,335:Not Applicable
336:0-600.0 A
337:0-999.9 A
Accuracy
333,334,335:Not Applicable
336,337:2% 3 counts
AC Volts
Range
333,334,335,336,337:0-600.0 V
Accuracy
333,334,335:1% 5 counts (50/60 Hz)
336,337:1% 5 counts (20-100 Hz), 6% 5 counts (100-400 Hz)
AC Response
333,334:Averaging
335,336,337:True-rms
DC Volts
Range
333,334,335,336,337:0-600.0 V
Accuracy
333,334,335,336,337:1% 5 counts
Resistance
Range
333:0-600.0 Ohms
334,335,336,337:0-600.0 Ohms, 601-6000 Ohms
Accuracy
333,334,335,336,337:1.5% 5 counts
Continuity
333,334,335,336,337:< 30 W
Frequency
Range
333,334,335,336:Not Applicable
337:5-400 Hz
Accuracy
333,334,335,336:Not Applicable
337:0.5% 5 counts
Trigger Level
333,334,335,336:Not Applicable
337:10-100 Hz > 5 A 5-10 Hz, 100-400 Hz > 10 A

Fluke 330 Series General Specifications
Min/Max 337 Only
Backlight333: No
334,335,336,337: Yes
Operating Temperature -14 F to 122 F (-10 C to +50 C)
Battery LifeAlkaline 150 hours continuous, automatic low battery indicator
Safety Rating IEC 1010-2-032, 600 V Cat III
Warranty
3-year warranty
Temperature De-rating Add 0.1 x specified accuracy for each C above 28 C or below 18 C
Storage Temperature -40 F to 140 F (-40 C to 60 C)
Display Hold Yes
Size Height 9.375" (23.8 cm)
Width 3.125" (7.9 cm)
Depth 1.625" (4.1 cm)
Weight 11 oz. (311.8 g)

Back to top of page

Accessories and Ordering Information

Included Fluke 330 Accessories
  • Soft carrying case
  • TL75 test leads
  • (2) AA alkaline batteries
  • Instruction card
  • Safety information sheet
Ordering Information
Accessory TypeModel NameFluke 330 Series Accessory or Option Description
Options H3 Fluke 330 SeriesH3 Holster with Test Lead Storage
Rugged holster Built in pocket for test lead storage Velcro flap for safe storage Convenient belt loop with snap Recommended for 330 Series Clamp Meters
Test Leads, Probes and Clips AC85aFluke 330 SeriesAC85 Large Jaw Alligator Clips
Large Jaw Alligator Fully insulated banana-jack alligator clips. Extra strong teeth and new spring design provide superior grip. Extremely rugged. Large .787" (20 mm) opening. 600V per IEC 1010, Overvoltage Category III (Heavy Industrial Rating), 10A rating. One red, one black. Clips
TL23F Fluke 330 SeriesTL23 Electrical Test Lead Set
Designed to withstand the punishing conditions found in electrical, industrial and HVAC/R environments. This set includes a pair of the following items (one red and one black):
  • TL24 1.6M (63") silicone-insulated test leads, with cold/heat resistance from -80C to + 150C (-112F to + 302F). Silicone insulation plus 384 internal strands provide superior flexibility, and resistance to tangling, chemicals and tearing. Standard diameter banana plug connectors (one right angle and one straight) are shrouded to prevent accidental contact, and have integral strain relievers. 10A rating. CAT III 1000V. UL1244 listed.

  • AC20 Electrical Alligator Clips, with safety grip and spring-loaded jaws with wide 20mm (O.78") opening. 10A rating. CAT III 1000V. UL1244 listed.

  • Slim-Reach, Test Probes offer safety with slender, Slim-Reach bodies and stainless steel tips. Effective for reaching closely spaced deep test points or recessed terminals. All Slim-Reach probes are rated for 10 amps, and may be used in 1000V CAT III environments. UL Listed.

  • The TL23F Electrical Test Lead Set includes TP1 Slim-Reach test probes, with flat 1.78 mm x 2.79 mm (0.07 in x 0.11 in) blades designed to hold securely in blade type electrical wall sockets, typically found in North America.
  • TL24 Fluke 330 SeriesTL24 63" Right Angle/Straight Silicone Test Leads
    Features at a glance:

    385 internal strands for flexibility prevent kinks and bends in test leads; superior strain relief is also provided.
    • Silicone-insulated test leads have superior flexibility and cold/heat resistance from -80C to +150C (-112F to +302F). Won't crack from cold, or melt from accidental contact with soldering iron. Good chemical and tear resistance.
    • Safety-designed with double insulation for added protection.
    • All metal on banana plugs is capped and shrouded to prevent accidental contact.
    • Extra-long length of 63" (1.6m). 1000V per IEC 1010, Overvoltage Category III (Heavy Industrial Rating), 10A rating. UL 1244 Listed.
    • Compatible with all meters accepting safety-shrouded, standard-sized banana plugs. One red, one black, 63" ( 1.6 m). Best suited for test clips with plunger-style jaws.
    • Shrouded, straight connector on one end.


    © 2007 Fluke 330 Series by Industrial Electronics By Ross LLC
    Fluke 330 Series Fluke Digital Multimeters Fluke 330 Series Fluke Clamp Multimeters Fluke 330 Series Fluke Graphical Multimeters
    Fluke 330 Series Fluke Accessories Fluke 330 Series Fluke Application Note 1 Fluke 330 Series Fluke Application Note 2
    Fluke 330 Series HOME PAGE Fluke 330 Series Fluke Application Note 3 Fluke 330 SeriesFluke Application Note 4
    Fluke 330 Series Fluke MENU

    Industrial Electronics Distributor of FLUKE 330 Series Clamp Meters Call: 414-327-1555

    Fax : 414-327-0577
    Email: indelect@execpc.com
    Catalog, Quote, Availability.
    © 1995-2007 Industrial Electronics By Ross LLC
    ©2003-2006 SEO by synscon.com
    Search Engine Marketing Company